Lost Password? No account yet? Sign up! Why bother?
  • Narrow screen resolution
  • Wide screen resolution
  • Auto width resolution
  • Increase font size
  • Decrease font size
  • Default font size

SmallNetBuilder - Small Network Help

  
Home arrow Home arrow All FAQ

Wireless Networking - General

Answer
What is the maximum number of wireless clients that can be networked using Ad Hoc mode, i.e. w/o access point?

The theoretical limit, which is the same as in Ethernet, is determined by the 48 bit MAC address field in each wireless data frame.

The practical limit is determined by constraints that may be built into client drivers. As a rule of thumb, Ad Hoc networks with 16 to 32 stations should be possible.

Most Read

 
 

Over At The Forums

Difficult Routing Scenario - Point to Point to VPN Tunnel
Here's my situation. Please help. 3 Offices Office A Office B Office C Office A and B are connected via Point To Point, using Cisco routers. Office B and C...

Need help with nework planning - Wireless
Not sure if this is ever going to actually happen, but I am supposed to talk to my Apt manager about creating a network across...

Onboard and Intel Matrix Storage Manager RAID
Tried to get back to the Fast NAS series today by trying BIOS level RAID with an Intel ICH9 controller. Got pulled up short very...

SSD Question
Hello Tim and Group, I'm not sure where to put this on this forum, so I'm placing it here, because at least it's "storage" albeit not...

5-port Gig Switch tested with NetIQ Chariot Throughtput Benchmarks
Tim, What do you think of these results for unmanaged 5-port Gig Switch? NetIQ Chariot Throughtput Benchmarks 4 PC's Full Duplex - 512 MB packets - Total 2602...

Slideshows

Western Digital ShareSpace QNAP TS-509 Pro D-Link DNS-343 4-Bay Network Storage Enclosure Thecus N3200 RAID 5 NAS D-Link DIR-628 RangeBooster N Dual Band Router Adtran NetVanta 3120 More
 

Ldr:0.00208497047424, Rct:0.00578904151917, Sky:0.00738596916199, Tlink:0.0882098674774, TopPG:0.0882868766785, GQV:0.0884389877319 seconds to load.