Home All FAQ Wireless Network Setup | |
Click on a question to see the answer
Is there an advantage to moving a wireless repeater that connects to a network outside my home to an outside wall? Can I mix wireless MacOS and Windows clients on a wireless router that was set up using Windows? How many wireless clients can be supported by a single access point? I want to set up a wireless network. Do I need both an Access Point and a router, or is a wireless router OK? Can I share my Internet via wireless LAN by just adding a wireless adapter to the computer connected to the cable modem? Can I set up a wireless network without an Access Point or wireless router? How do I add a printer to a wireless network? How do I connect two wireless routers wirelessly? If I get a better router, can I use my existing wireless router as Access Point? Can I use a wireless router even if I don't have a broadband connection? Can I print with my notebook with 802.11b PC card, to a printer whose USB port is connected to a USB 802.11b adaptor? If a PC has only an Ethernet port, is there a way to connect it to a wireless LAN without swapping network cards? Can I change the Beacon Period of a wireless client card? Can a wireless Router alternatively be used as a wireless Client? Can I avoid the problems of a mixed-mode wireless LAN by setting up separate 11b-only and 11g-only access points? Can I bridge a wireless router even if it doesn't have built-in bridging? How do I use a different DHCP server with a wireless router? How do you set up a wireless router to allow wireless computers to get their IP addresses from a different DHCP server? I use my wireless notebook on multiple networks. How can I connect to them without having to keep changing my network settings each time I switch networks? How can I share a remote wireless connection with all my LAN's wired computers? How can I make a wireless connection that spans multiple floors of an office building? What is the difference between an AP's client mode and bridging mode? Is it possible to use a wireless Compact Flash adapter by using an 8-in-1 card reader that accepts CF cards? I can't get an Ethernet cable to where my broadband modem is located. Can I use a wireless connection instead? Can I use a multifunction printer with a wireless print server? Can I connect multiple signal boosters (like Hawking's HSB1) and a high-gain antenna together to get an even stronger signal?Most Read
- Wireless
- SMC SMCWGBR14-N Barricade N ProMax Draft 11n Wireless 4-port Gigabit Broadband Router Reviewed
- D-Link DIR-655 Xtreme N Gigabit Router Review:Draft 2.0 arrives
- D-Link DIR-825 Xtreme N Dual Band Gigabit Router: Second Time's the Charm?
- D-Link announces small-biz draft 802.11n APs
- Linksys WRT600N Review: Dual-Band 11n comes to Linky-land
- NAS
- LANs
- MM & VoIP
- Security
- Other
- Basics
Over At The Forums
|
Difficult Routing Scenario - Point to Point to VPN Tunnel
Need help with nework planning - Wireless
Onboard and Intel Matrix Storage Manager RAID
SSD Question
5-port Gig Switch tested with NetIQ Chariot Throughtput Benchmarks
|
Slideshows
 |
 |
 |
 |
 |
 |
More |
The Charts
Wireless Performance Charts: SMC SMCWGBR14-N |
 NAS Performance Charts: Maxtor Central Axis |
| Router Performance Charts: SMC SMCWGBR14-N |
Tags
3G 802.11n Apple Atheros Belkin Buffalo BYOD CES 2007 CES2008 Contest D-Link gigabit Hacking HomePlug How To HP Intel Iomega IPsec LAN Linksys media adapter Media player Microsoft NAS Netgear Network camera open source powerline Qnap RAID router Router reviews security Site stuff Skype Skype phone Slideshow Smart Switch SMC Synology Thecus Trendnet Tutorial UWB VoIP VPN WiFi Wireless Reviews ZyXELTG Daily
Get Email Updates
ZWaveWorld
Ask the Expert: How to Automate Window Coverings
Z-Wave Advanced Energy Control Framework Lets You Monitor Energy Use
|
© 2006-2008 Pudai LLC All Rights Reserved. Copyright of all documents
and scripts belonging to this site by Pudai LLC. |
| |||
DNS by |
||||
