Wireless
Wireless How To
How To: Setting up WDS Bridging / Repeating | How To: Setting up WDS Bridging / Repeating |
|
|
| Tim Higgins | |
| April 14, 2004 | |
IntroductionMany 802.11g products now come equipped with WDS bridging and repeating capabilities, but getting them set up isn't as easy as it should be. This ProblemSolver will first review the basics of WDS and compare it to previous bridging methodologies. We'll then provide some tips to help you maximize your chances of WDS success. We'll put it all to work by stepping through two detailed setup examples that will show you how decipher your product's bridging controls and understand how to use them. Then we'll wrap up with some examples of "advanced" WDS configurations.
Tags: Bridging, How To, WDS, WiFi, Related Articles:How To: Manually Setting Up the Linksys WRE54G Wireless-G Range ExpandWireless Networking NTK - Setting up Wireless Bridging NTK NTK - Wireless Repeating with the D-Link DWL-900AP+ ASUS WL-330 Pocket Wireless Access Point reviewed |
|
Difficult Routing Scenario - Point to Point to VPN Tunnel
Need help with nework planning - Wireless
Onboard and Intel Matrix Storage Manager RAID
SSD Question
5-port Gig Switch tested with NetIQ Chariot Throughtput Benchmarks
|
|
|
|
|
|
|
|
More |
| Wireless Performance Charts: SMC SMCWGBR14-N |
| Router Performance Charts: SMC SMCWGBR14-N |
Ask the Expert: How to Automate Window Coverings
Z-Wave Advanced Energy Control Framework Lets You Monitor Energy Use