Lost Password? No account yet? Sign up! Why bother?
  • Narrow screen resolution
  • Wide screen resolution
  • Auto width resolution
  • Increase font size
  • Decrease font size
  • Default font size

SmallNetBuilder - Small Network Help

  
Home arrow LAN & WAN arrow LAN & WAN Reviews arrow Linux Embedded Appliance Firewall Review
Linux Embedded Appliance Firewall Review Print E-mail
Jim Hubbard   
June 17, 2004

Introduction

 Linux Embedded Appliance Firewall

Linux Embedded Appliance Firewall
Summary Free, extremely flexible and powerful Linux based firewall distro. Setup and configuration may be difficult for those unaccustomed to command-line interfaces
Update 17 June 2004 - Corrected developer information
Pros • Free
• Fast (even with old CPUs)
• Extremely configurable, including features and number of physical interfaces
• Can run from single floppy
Cons • Configuration and setup not for newbies

This review kicks off our Linux networking coverage and welcomes author Jim Hubbard to TomsNetworking.

He's one of three co-founders of the Rockingham County Linux Users Group, and a staunch supporter of Open-Source Software. When not knee-deep in the latest Linux distro, he's also Vice-President, Project Manager, Estimator and networking honcho for Dyer's, Inc. in Eden, NC.

Being connected to the Internet these days is like playing dodge ball when you were a kid - lots of people trying to hit you with something, preferably in a place where it will hurt or leave a mark. At least that's the way we played it. The good news is that you can protect yourself from many Internet based attacks through the use of a good firewall.

So what does a firewall do? When you're connected to any computer network like the Internet, communication takes place on different ports. A network firewall is basically a system that controls communications to and from you based on those ports. If you're not running a web server for instance, then nobody from outside should be initiating a connection to you on port 80, so the job of a basic firewall then would be to block such requests, while still allowing you to surf the web, read your email, and so forth.

Sometimes what is commonly called a firewall goes beyond the basic "block out the bad stuff" functionality. Let's say you have a small network with a connection to the Internet and you also run a web server exposed to the Internet. A firewall in this case would also need to include routing capabilities. It will need to provide a means of sharing a single connection to the Internet so that everyone on the local network can have access, and it will need to forward port 80 requests from the outside to your web server, all while keeping invalid requests out. In addition, a firewall/router system may also provide other features, such as DHCP service, DNS service, content filtering, packet sniffing, traffic shaping, VPN tunnels, web proxy, application proxy, and just about any other method devised to keep the local network running smoothly and the bad guys out.

What is commonly referred to as a firewall then, could be as simple and cheap as a piece of software installed on your local computer (like ZoneAlarm), or it could be a dedicated rack full of high end hardware that provides nearly every network defense strategy known to man. Today I'd like to introduce you to something that I like to think of as the best of both those worlds, an Open Source, Linux based firewall called LEAF-Bering uClibc. Cheap? Try free. High end? It's as functionally rich as you want to make it. You provide a computer to install it on, and by using LEAF-Bering uClibc you can build a firewall/router that will rival some of the best firewall systems available.



Tags: LEAF, Linux, open source, router,

Related Articles:

ClarkConnect Gateway / Server
SmoothWall Express 2.0
Monitor your Network for Free with Nagios
IPCop Linux Firewall
m0n0wall Firewall V1.0 - Part 1
 

Most Read

 
 

Over At The Forums

Wireless Setup for Bed and Breakfast
Thanks in advance for any suggestions. I have a bed and breakfast with 8 rooms in two buildings and have used Linksys WRT54G (old versions with...

Dlink (DIR-655) and VOIP problem
Hello, I can't get a Siemens C450IP VOIP phone working together with a DIR-655. The phone is working without a problem on a USRobotics USR5463 using...

Mini-ITX NAS build
I'm currently looking for some ideas on a fast NAS motherboard at home. Looking into a Mini-ITX because of size and low power. Some requirements...

Dlink DIR-655 Vista Security Issue
I've used the DIR-655 router for quite some time and without hiccup. However, recently I have installed Vista (what a mistake), and under the Network...

DIY NAS User GUIs
Hello all, I have a small network that can vary between 4 and 15 users on any given day, and needs about 1.5-2.5TB of data stored,...

Slideshows

Western Digital ShareSpace QNAP TS-509 Pro D-Link DNS-343 4-Bay Network Storage Enclosure Thecus N3200 RAID 5 NAS D-Link DIR-628 RangeBooster N Dual Band Router Adtran NetVanta 3120 More

Win This!

Enter to Win!

You could win a Promise NetStor NS2300N NAS.

Learn How!

 

Ldr:0.00163006782532, Rct:0.0408661365509, Sky:0.0447869300842, Tlink:0.243679046631, TopPG:0.243754148483, GQV:0.243936061859 seconds to load.