NAS
NAS Reviews
QNAP TS-409 Review: The Quad drive NAS for You? | QNAP TS-409 Review: The Quad drive NAS for You? |
|
|
| Craig Ellison | |||||||||||
| February 27, 2008 | |||||||||||
Introduction
If you’re considering a NAS to expand your network storage, you have three different types to choose from. First, there’s the simple, single-drive device that merely adds storage capacity but provides no fault tolerance. All of your data is stored on a single drive, and if that drive crashes, you’ll lose your data (unless you’ve done proper backups). Next, there are two-drive models. Virtually all of the NAS manufacturers offer two-drive models. You have the option of RAID 0, RAID 1, or JBOD. If you configure for RAID 1, all of your data from one drive is mirrored onto the second drive. However, it’s the four-drive NASs that offer the most options for fault tolerance. When you start looking at four-drive devices, you’ll notice that in these devices, different manufacturers include different features for RAID configuration. Some allow for RAID 0, 1 and 5. Other devices include RAID 10, RAID 6, or RAID 5 with a hot spare. More importantly, some support hot swappable drives. In this review, I’ll be looking at the QNAP TS-409 Pro. Last fall, we reviewed the QNAP TS209. In that review, Jim Buzbee found that the TS209, a dual-drive version of the TS101, was a full-featured, hot-swappable NAS with full LAMP server capabilities. The feature set of the TS-409 mirrors that of the TS209 with additional RAID capabilities available in the four-drive model. Thus, I won’t spend much time describing features already covered in previous reviews.
Product Tour
Figure 1: QNAP TS-409 Front PanelThe front panel of the TS-409 is quite similar to the TS209. There are seven LEDs as identified above, along with one of the unit’s three USB 2.0 ports. The One Touch Copy Button allows you to copy the contents from an external USB storage device to a pre-defined volume on the server, or depending on your configuration, copy from the NAS to the USB storage device. The screened front panel is secured with only a flimsy plastic tab-and-slot style latch. For security, I would have preferred a front panel that locks to physically secure the drives, or at least a latch that will withstand more wear and tear.
Figure 2: TS-409 Rear PanelRelated Articles:Slideshow - LaCie Ethernet Disk RAID drive fail and recoveryQNAP adds 5-bay SMB NAS Slideshow: Qnap TS-209 Pro Slideshow: Trendnet TS-S402 2-Bay SATA I/II Network Storage Enclosure Slideshow: Qnap TS-409 Pro Turbo |
|||||||||||
|
Difficult Routing Scenario - Point to Point to VPN Tunnel
Need help with nework planning - Wireless
Onboard and Intel Matrix Storage Manager RAID
SSD Question
5-port Gig Switch tested with NetIQ Chariot Throughtput Benchmarks
|
|
|
|
|
|
|
|
More |
| Wireless Performance Charts: SMC SMCWGBR14-N |
| Router Performance Charts: SMC SMCWGBR14-N |
Ask the Expert: How to Automate Window Coverings
Z-Wave Advanced Energy Control Framework Lets You Monitor Energy Use