Router Charts

Router Charts

Router Ranker

Router Ranker

Router Chooser

Router Chooser

NAS Charts

NAS Charts

NAS Ranker

NAS Ranker

More Tools

More Tools

What's New

  • 1
  • 2
  • 3
  • 4

Sponsored Articles

  • 1

Top Performing Routers

AC3200
AC1900
AC1750
AC1200

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Featured Sponsors



Top Performing NASes

NoRAID
RAID1
RAID5

Over In The Forums

I'm running several ASUS routers, some with Merlin, one with stock FW, and one with Tomato. I have a problem that occurs when I have an SSH session op...
IN the wireless general tab I have an option in the wireless mode that says b/g protection. What does it do? Do I need it on or off if I only have iPh...
I want to be able to dynamically enable/disable my port forwarding rules via SSH. I have determined that the nvram setting that needs modified in orde...
I'm trying to get the Merlin built-in vsftpd to allow the client access to anywhere other than the USB device. In this thread: http://www.snbforums.c...
I was given a TM-AC1900 from a family member last year. I was trying to get DD-WRT on it and I'm not sure if I bricked it. I just started to give it...

Most Read This Week

  • 1
  • 2

Don't Miss These

  • 1
  • 2

Introduction

Apple TV

In my Apple TV review, I walked through the basic features of the Apple TV network multimedia player. I really liked the product, but it was lacking in some areas—the most glaring being its limited support for video formats. The only supported video formats for the Apple TV are H.264 and MPEG4. I also found that I couldn't use the bulk of its internal 160GB drive since I was synching it only with my 80GB laptop. Finally, I was disappointed that the Apple TV couldn't make use of the Network Attached Storage (NAS) devices I tend to collect on my LAN.

Fortunately, all these shortcomings can be addressed with a little creative, warranty-voiding work. Soon after the Apple TV was released, a number of people started taking it apart to see what made it tick. It was quickly apparent that the ATV could easily be extended, since internally it runs a stripped-down version of Apple's OS X, executing on an x86 processor.

In this how to, I'll try out some of the extensions that have been released for the box, and I'll add a simple one of my own—the ability to transparently synchronize media files from my NASes to the Apple TV.

Getting Started

Any time you're trying to modify a product like this, the most important step is to get command-line access so that you can poke around a running system and easily make changes. The hacking community quickly found that the standard secure-shell daemon (sshd) copied from an x86-based OSX system would start up and run fine on the Apple TV. But the limiting factor for many people was the process of getting it going.

The hack required taking the box apart, removing the hard drive, attaching a 2.5 inch IDE adaptor, mounting the drive on an OSX system, copying the file over, adding startup scripts, and then putting it all back together. Fortunately, as time went on, the process evolved and became much easier.

It was found by the folks over at AwkwardTV.org that one could build an Apple TV-bootable USB memory stick that would do the whole process and more automatically. This bootable USB stick (called the "Patchstick") is what I used to get my system going. And if you want to follow along, you can download the script that builds it here. You'll also need to download and mount the latest Apple TV update from Apple, found here. Once you have the components, follow the instructions found in the zip file to build your Patchstick.

Note that the script and the described Patchstick building process is designed for an Apple OS X system. Windows and Linux uses can play along, but it will be a bit more work to build the Patchstick. (Instructions can be found here.)

Alternatively, you can take your chances on a pre-built Patchstick image found on the torrent networks, but like most files on the torrent networks, there's no guarantee about what you're getting and you may be violating Apple's copyright on some of the components used.

Once you have the Patchstick built, it's just a matter of plugging it into the rear USB port and cycling power. If you've done everything right, you'll get a decidedly non-Apple-like bootup screen with lots of errors and warnings as seen in Figure 1.

Apple TV Boot under Patchstick

Figure 1: Apple TV Boot under Patchstick

If it boots, don't worry about the errors, as they are harmless and you'll never see them again.

Top Performing Routers

AC3200
AC2600
AC1900
AC1750
AC1200

Top Performing NASes

NoRAID
RAID1
RAID5

Over In The Forums

I'm running several ASUS routers, some with Merlin, one with stock FW, and one with Tomato. I have a problem that occurs when I have an SSH session op...
IN the wireless general tab I have an option in the wireless mode that says b/g protection. What does it do? Do I need it on or off if I only have iPh...
I want to be able to dynamically enable/disable my port forwarding rules via SSH. I have determined that the nvram setting that needs modified in orde...
I'm trying to get the Merlin built-in vsftpd to allow the client access to anywhere other than the USB device. In this thread: http://www.snbforums.c...
I was given a TM-AC1900 from a family member last year. I was trying to get DD-WRT on it and I'm not sure if I bricked it. I just started to give it...