Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

CES 2013

CES logoTRENDnet announced a pair of compact wireless network extenders and a draft 11ac adapter that connects via USB 3.0.

The TEW-717HRE N300 Nano Easy-N-Range Extender and TEW-713RE N150 Nano Easy-N-Range Extender are compact wall-plugged 2.4 GHz wireless extenders.

Each works with any router to receive and retransmit its signal to extend your wireless network's reach. Both are easily installed by pressing a Wi-Fi Protected Setup (WPS) button on your router and then the extender. No CD required.

TRENDnet Nano Easy-N-Range Extenders

TRENDnet Nano Easy-N-Range Extenders

The TEW-713RE has a maximum link rate of 150 Mbps and is scheduled to ship in April at $44.99 MSRP. The TEW-717HRE, with its 300 Mbps maximum link rate will follow in May for $59.99 MSRP.

Rounding out TRENDnet's CES 2013 announcements is the TEW-805UB AC1200 Dual Band Wireless USB 3.0 Adapter. Unlike the current crop of draft 11ac USB adapters, this one connects via USB 3.0, not 2.0.

The TEW-805UB supports maximum link rates of 867 Mbps in 5 GHa and 300 Mbps in the 2.4 GHz band. It of course supports Wi-Fi Protected setup and all wireless security modes. It is scheduled to ship in April for $69.99 MSRP.

TRENDnet TEW-805UB AC1200 Dual Band Wireless USB 3.0 Adapter

TRENDnet TEW-805UB AC1200 Dual Band Wireless USB 3.0 Adapter

Featured Sponsors




Top Ranked Routers


AC5300

AC2600

AC1900

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Wanted to mention that the "debug" page in the stock Netgear firmware works on the R7800 as well as the Orbi:192.168.1.1/debug.htmwhere 192.168.1.1 sh...
For a few months now I have had this random issue of my 2.4GHz SSID just disappearing. I was never able to really capture it myself since it either ha...
I am trying to connect a linksys WET610n ethernet bridge to a Netgear Fuse. Connecting the devices are easy; search for a the SSID of the Netgear devi...
Hey guys I have modified my dhcp lease range so that I can setup a lab. But some of my older items are connecting outside the dhcp range. Is there an ...
I'm trying to connect an Asus RT-AC88U to a mobile hotspot for Internet access.The hotspot supports USB 2.0 and 802.11ac up to 433 Mbps.Which should b...

Don't Miss These

  • 1
  • 2
  • 3