Router Charts

Router Charts

Router Ranker

Router Ranker

Router Chooser

Router Chooser

NAS Charts

NAS Charts

NAS Ranker

NAS Ranker

More Tools

More Tools

Introduction

I've always been disappointed with off-the-shelf digital answering machines that are available from your favorite retailer. The quality is never up to par, the features are never quite right and generally there a few features that I'm not interested in. And since every answering machine works differently, you must always keep the manual around in case you need to work simple features such as changing the message or setting up multiple mailboxes.

After years of frustration and living with sub-par answering machines, I've finally decided to create my own. Sure, it sounds like a daunting task, but thanks to Mark Spencer of Digium, Inc. we now have a fantastic piece of software to work with called Asterisk. Asterisk is a complete PBX system and well known in the VoIP world. While it is admittedly overkill for the task of a simple answering machine, it met my goals (Table 1) perfectly and offers nearly unlimited expansion as my needs grow.

Short Term Long Term
  1. Work with my standard analog phone line
  2. Be a stand-alone device that didn't run on my main workstation PC
  3. Record voicemails with similar functionality to an answering machine
  4. Send email notification of new voicemails
  5. Keep a CallerID log
  1. Allow me to view CallerID log from a web page
  2. Connect to a VOIP provider for cheap long distance
  3. Issue a distinct tone if voicemails are waiting
  4. Put it in a small form-factor case
  5. Create a VOIP phone network inside my home, complete with extensions
Table 1: Project Objectives

NOTE! Note: While I take the approach of editing configuration files to bend Asterisk to my purposes, you could also use the more user-friendly Asterisk@Home (AAH) to build your answering machine. See our previous article on AAH for more info.

The first part of the process was determining the operating system and hardware to use for the job. Being that Asterisk is licensed under the GPL, I decided to stick as much as possible to using open source software and that meant using Linux. While I'm no expert, I am most familiar with the Debian distribution so I decided to go that route. For those of you that aren't Linux users, an important point to remember is that everything in Linux is case sensitive.

We first need to create a bootable installation CD and since I wanted a minimal amount of software, I started by downloading the official netinst ISO image for Debian stable which is currently named sarge. I chose the i386 distro, as most of the hardware I have around here is Intel compatible. At only 108 Mb, it didn't take long to finish the download and burn the image to CD.

After much research, I determined that the hardware needs were minimal and almost any standard PC would do the job. The only specific hardware I needed was an FXO (Foreign Exchange Office) interface to provide connection to my PSTN line. There are many devices available, but I specifically wanted to keep everything as inexpensive as possible! I discovered that Digium used to sell a single port X100P PCI card that can be obtained on Ebay for $10.00-$20.00 (USD) delivered.

For the PC, I pieced together a system that consisted of an Athlon 850 MHz CPU on a Gigabyte motherboard with 384 MB of RAM, 10 GB hard drive and a CD-ROM drive I had laying around. I used an ATI PCI video card and since this particular motherboard didn't have Ethernet built in, I added a 10/100 PCI NIC.

Featured Sponsors


Win This!

Linksys Linksys LAPC1750PRO

You could win a Linksys LAPC1750PRO AC1750 Pro Dual-Band Access Point

Learn How!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Top Performing Routers

AC3200
AC2600
AC1900
AC1750
AC1200

Top Performing NASes

NoRAID
RAID1
RAID5

Over In The Forums

Hello i am having a bit of a hard time understanding how to use ip tables in RMerlin firmware. I have read through the info and it seems like i have t...
Good day, I currently have the 2 routers at caption. RT-AC67U is my main router connected to my internet modem. I need advice for the following: ...
A few days ago I bought an AC87U .My speed was ok on stock firmware(900-930) but on Merlin goes only to 350Mbps I am talking about the speed from WAN ...
Hi, My router logs are displaying an error message every minute: unknown daemon.warn miniupnpd[986]: SendSSDPNotify(): truncated output (515>=512) ...
Has anyone been able to get HDHomerun work with a VPN? I have my VPN setup on the router and if I do that I can't get it to work, nut if I turn it of...

Don't Miss These

  • 1
  • 2
  • 3