Router Charts

Router Charts

Router Ranker

Router Ranker

Router Chooser

Router Chooser

NAS Charts

NAS Charts

NAS Ranker

NAS Ranker

More Tools

More Tools

Introduction

LinkTheater A&G

At a Glance
Product Buffalo LinkTheater Wireless A&G Network Media Player (PC-P4LWAG)
Summary Network Multimedia player with Wireless 802.11a & g support
Pros • Inexpensive
• UPnP Compatible
• Viiv Compatible
Cons • Limited video codec support
• No HDMI port
• Dull user interface
• Buggy

When I reviewed the Buffalo LinkTheater mini last year (which has since been discontinued), it was the first network multimedia device I'd seen in the sub $100 range. But even though the mini was cheap, I judged it missed the mark by making too many concessions to get the price down. In this review, I'll check out a new entry in the LinkTheater line. The Buffalo A&G Network Media Player can be found for around $210 and has the same form-factor as the mini, but it adds support for wireless networking, additional video codecs, 720p HD capabilities and optical audio.

Setup

Figure 1 shows the back panel of the LinkTheater. From left to right, you can see a 10/100 Ethernet port, TOSLINK (optical) digital audio port, right and left analog RCA audio connectors, a composite video port, an S-Video port, and a D4 connector for component HD video (cable included). Also present are two 802.11a/g antennas. But nowhere to be found is an HDMI port, which seems to be a continuing theme for Buffalo media players.

Back panel

Figure 1: LinkTheater A&G back panel

Supporting 802.11a is an interesting choice by Buffalo, since it's not often used these days. But perhaps Buffalo chose 802.11a to give users the option of a utilizing a less-crowded wireless spectrum, since the range used by 802.11g is getting pretty crowded.

Although wireless use is a major feature of this unit, for my initial checkout I hooked it up with Ethernet. When you can use it, Ethernet is always preferred for moving large video files around. In this mode, the device booted up and automatically acquired an address via DHCP.

I wanted to check out the HD capabilities of the device, but the initial setup has to be accomplished via the analog standard-def output. Once the device is booted up, the configuration screen can be used to change the default output to the HD port (Figure 2).

Changing the output resolution

Figure 2: Changing the output resolution

When running, the product drew about 7 watts of power, and when idle it drew about 6, so it is an efficient little unit. The LinkTheater can get media in several ways. If you have a Buffalo Network Attached Storage (NAS) device such as the LinkStation or a TeraStation on your LAN, the LinkTheater can acquire the data using a Buffalo-unique protocol. The device can also acquire its data using any DLNA server on your LAN.

If you want to bypass the LAN altogether, it can get data from a FAT32 USB drive plugged into a front USB port. Finally, if you have an Intel Viiv certified PC, the LinkTheater can get its data that way. For my initial test, I turned to the included Windows-only CD for software installation. Figure 3 shows the first menu from the installation.

Software installation

Figure 3: Software installation

Featured Sponsors




Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Top Performing Routers

AC3200
AC2600
AC1900
AC1750
AC1200

Top Performing NASes

NoRAID
RAID1
RAID5

Over In The Forums

This is my first question here om this forum. Hoop it's not a noob one but I really can use some help here. I have a Asus RT-AC68U with Asuswrt-merli...
Hello, yesterday i just tried to update the firmware on my router RT AC 68U, which was working in AP mode. However just after update, when i saw the p...
I was messing with a startup script while away from home (I know, I should have left it alone), and something I did to the services-start script is no...
After my provider rotates my WAN IP address, my router as a rule (but not allways) looses ability to route any devices (LAN and WLAN) out to the Inter...
It seems like the page LAN->DHCP Server keeps loading. After a while the script logs out the admin user. I try to change some settings in DHCP but th...

Don't Miss These

  • 1
  • 2
  • 3