Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Wi-Fi Router Charts

Click for Wi-Fi Router Charts

Mesh System Charts

Click for Wi-Fi Mesh System Charts

IPsec Client Configuration, continued

Step 3: Create the "To LAN" Security Rule

  1. In the wirelessvpn Properties window, deselect the Use Add Wizard check box then click the Add button to create a new rule.
  2. In the New Rule Properties window that opens, select the IP Filter List tab then click the Add button.
  3. In the IP Filter List window that opens, Type "To LAN" into the Name box, deselect the Use Add Wizard check box then click the Add button.
  4. In the Filter Properties window that opens, make the entries shown in Figure 7, making sure the Mirrored check box is checked.
  5. Click OK to close all the windows until you get back to the wirelessvpn Properties window.

"To LAN" IP Filter Properties

Figure 7: "To LAN" IP Filter Properties
(click on the image for a full-sized view)

Step 4: Create the "From LAN" Security Rule

  1. Starting at the wirelessvpn Properties window, repeat Step 3, but enter "From LAN" in the IP Filter List window and enter the info shown in Figure 8 in the IP Filter Properties window.

"From LAN" IP Filter Properties

Figure 8: "From LAN" IP Filter Properties
(click on the image for a full-sized view)

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Don't Miss These

  • 1
  • 2