Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN How To

IPsec Client Configuration, continued

Step 5: Configure the "To LAN" Filter Action

  1. Starting at the wirelessvpn Properties window, select the "To LAN" rule, making sure its check box is checked, then click the Edit button
  2. The Edit Rule Properties window shown in Figure 9 should open. Check that the "To LAN" radio button is selected.

"To LAN" Security Rule Properties

Figure 9: "To LAN" Security Rule Properties
(click on the image for a full-sized view)
  1. Select the Filter Action tab, then click the Require Security radio button to select it as shown in Figure 10, then click the Edit button.

"To LAN" IP Filter Action

Figure 10: "To LAN" IP Filter Action
(click on the image for a full-sized view)
  1. Verify that the Require Security Properties window looks the same as shown in Figure 11. It's most important that the item at the top of the list have the following entries:
    - Type = Custom
    - AH Integrity = <None>
    - ESP Confidentiality = 3DES
    - ESP Integrity = MD5

    The Key Lifetimes column defaults should be 100000 / 900, but any values should work.

    Change the order of list items by selecting the item and using the Move up and Move down buttons

Require Security Filter Action Properties

Figure 11: Require Security Filter Action Properties
(click on the image for a full-sized view)
  1. If you need to change a Security method, select it and click the Edit button to open the Modify Security Method window, click the Custom radio button, then click the Settings button to open Custom Security Method Settings window shown in Figure 12.
  2. When you're done, click the OK button to close the window(s) and get back to the Edit Rule Properties window.

Custom Security Method Settings

Figure 12: Custom Security Method Settings
(click on the image for a full-sized view)

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello All!I'm a newbie on networking and wireless, I only know the basics, so bear with me. I purchased a Asus AC86U to use in my house to replace a A...
Hey guys, I have movistar STB's which require both connection to their VLAN 11 tagged interface (it does have nat) and also requires internet access w...
Hey guys. I have movistar, and I'm pretty sure the provided stb profile is for spain, which is basically the same with the only difference being diffe...
I am trying to setup my router (AX88) so that the traffic from the router (transmission) goes through VPN and the rest of the devices go through WAN. ...
I know what the link rates are for 2.4Ghz but what speeds are you really seeing in the US when using 2.4Ghz wireless. I am thinking of playing with 2....

Don't Miss These

  • 1
  • 2
  • 3