Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS How To

Setup Step 7 - Enable File Sharing

There are books and websites devoted to Samba, so I'm not going to try to make you (or me!) an expert. I'll just walk through the steps required to set up the previously-created "Public" folder for read/write access to anyone without requiring a login. Figure 14 shows the main screen of Webmin's Samba Windows File Sharing module. We're going to visit the Windows Networking screen first.

Samba main screen
Click to enlarge image

Figure 14: Samba main screen

The only changes you need to make in Figure 15 are the Windows Workgroup name (if it is not "Workgroup") and to disable the Master Browser function. The latter is optional, but probably a good idea to prevent Master Browser battles that can mess up Windows Network browsing. Make the changes and click the Save button.

RAID array successfully created and mounted

Figure 15: RAID array successfully created and mounted

You should now be back at the main Samba screen. Click the Create a new File Share link at the top of the page to open the page shown in Figure 16. I named the share "public" and navigated to the previously-created /mnt/raidarr/public folder.

Create Samba file share

Figure 16: Create Samba file share

Note that I have set the Automatically create directory button to No. I originally tried creating a share this way, but it didn't work. You can also enter a comment if you like. Click the Save button and your screen should look like Figure 17.

File share created

Figure 17: File share created

But we're not done yet! Click on the share name to open the Edit File Share screen (Figure 18), then click on the Security and Access Control icon in the Other Share Options area. The changes here are to set Writable to Yes, Guest Access to Guest only. Leave the Guest Unix user set to nobody. Save the changes and the main Samba screen should now show the share security as Read/write to everyone.

Setting File Share Security

Figure 18: Setting File Share Security

All you need to do now is to browse to the share. You should be able to open it and not get a login popup. Drag a file over to test writing, open it to test reading, then delete it to test, well, deleting! We're finally done! Now we can see if the switchover to Ubuntu was worth it!

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I've been a fan of ASUS routers for quite some time. My first one was a N66U. I loved the interface and how I could put different firmwares on it. I w...
Not sure if this is the right place to post this. I have an ASUS AC86U and with AES-NI it kicks OpenVPN butt. However, I am unsure of how likely it is...
Hello Im setting up a openvpn server on a remote asus router (AC56R). Router ip is 192.168.1.1Router openvpn server ip is 10.0.3.1openvpn is working o...
Hi,My IP WAN is ok... ...but the Server Certificate shows my LOCAL IP like this: View attachment 18667Lookup its ok for DDNS:...IP Wan invalid for H...
Hello,After a long time, I have recently updated my merlin software on my 86U. After upgrading, OpenVpn does not connect anymore. I keep getting an er...

Don't Miss These

  • 1
  • 2
  • 3