Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools
   Print 

Ranker Performance Summary
Edimax WAP1750
3 x 3 AC Dual-Band Wall-Mount PoE Access Point
Test Notes:
Firmware tested: 1.1.7
Test client: NETGEAR R7000 in client bridge mode (1.0.3.60 firmware)
# 1 for Total Wireless (18.0)
# 1 for 2.4 GHz Avg. Throughput (1.0)
#1 for 2.4 GHz Downlink Throughput Avg. [72.8 Mbps]
#1 for 2.4 GHz Uplink Throughput Avg. [70.575 Mbps]
# 1 for 2.4 GHz Max. Throughput (1.0)
#1 for 2.4 GHz Max. Downlink Throughput [115.3 Mbps]
#1 for 2.4 GHz Max. Uplink Throughput [128.4 Mbps]
# 1 for 2.4 GHz Range (1.0)
#1 for 2.4 GHz Downlink Range [0 Mbps]
#1 for 2.4 GHz Uplink Range [0 Mbps]
# 1 for 5 GHz Avg. Throughput (1.0)
#1 for 5 GHz Avg. Downlink Throughput [171.025 Mbps]
#1 for 5 GHz Avg. Uplink Throughput [174.35 Mbps]
# 2 for 5 GHz Max. Throughput (1.5)
#1 for 5 GHz Max. Downlink Throughput [430 Mbps]
#2 for 5 GHz Uplink Throughput Max. [346.5 Mbps]
# 1 for 5 GHz Range (1.0)
#1 for 5 GHz Downlink Range [56 Mbps]
#1 for 5 GHz Uplink Range [90.7 Mbps]

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

...

Over In The Forums

Update again on 2021/1/21 We are patching DNSmasq vulnerability disclosed by JSOF and will start to put beta firmware on ASUS support site for this i...
Hi,I last reported this issue about 3 weeks ago over GUI Feedback when one of my AiMesh Node (Bedroom) gone OFFLINE. I rebooted everything and all see...
Hi,I am starting using ntpMerlin with Chrony. By default the Chrony.conf uses "ntp.pool.org" but i have been seeing some peaks in the Offset, so I dec...
Hi everyone,Just recently connected 2 AX86U via 2.5GBE backhaul as AiMesh, and the connection quality appears as "Great" according to the firmware.How...
Hi, woke up this morning and had no internet after turning everything on, I usually power down my stuff at night when not in use. Anyhow turned it all...

Don't Miss These

  • 1
  • 2
  • 3