Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

The Hardware, Continued

The charging contacts on both the remote and the receiver are designed to function without needing to be snapped together. The remote rests snugly against the two contact points on the receiver. Side-to-side movement is restricted by the curved sides of the receiver, preventing a loss of contact with the charger's contact points.

The remote charges on the base / wireless receiver when not in use.

The remote charges on the base / wireless receiver when not in use.

Note that up to four receivers can be added to the Wireless DJ system, but only one room can be actively receiving a stream at any given time. (Add-on receivers can be purchased separately.)

A view of the Logitech Wireless DJ remote.

A view of the Logitech Wireless DJ remote.

The remote is definitely eye catching. Constructed of lightly brushed aluminum and glossy plastic, it has a sturdy feel and a pleasant weight. It balances comfortably in either hand, placing the thumb comfortably at the perfect angle to access the most frequently used buttons. The unique mechanical jog wheel located in the center of the remote is used to scroll through the information displayed on the monochromatic LCD screen, such as song titles, artist names and so on. The LCD is lit by three blue LEDs, creating a soft blue glow. The area surrounding the LCD screen is very shiny reflective plastic with a metallic inlayed "Wireless DJ" logo.

The power button, which is also located in the area surrounding the LCD screen, is quite small (about 2mm wide) but was not difficult to press. When the remote is powered up, the LCD screen is bright and the blue text is crisp and easy to read. Unfortunately, the screen is not very responsive - as soon as you begin scrolling, the text blurs significantly. The blurring is bad enough that it becomes difficult to keep track of the text unless you stop scrolling at regular intervals to check your progress.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello,I've been using asuswrt-merlin firmware for quite some time in my AC87U router. I was running version 384.9 since today when I decided to upgrad...
I want to first of all thank my Loyal followings of #Nobody.Here is another @SomeWhereOverTheRainBow thread-cast#my-first-one-everList of things neede...
Hi,Before I had one time where after a power outage config. reset to factory defaults... (just flashed config. and solved it)But this time was differe...
This is a bit of a long and complicated problem, and it is in two parts... so please bear with me.I have the following equipment.A Plusnet one hub (I ...
I would like to be able to tie OPENVPN to a specific SSID or LAN port, e.g I want default traffic go out on the Internet, but specific devices to use ...

Don't Miss These

  • 1
  • 2
  • 3