Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Introduction

uebo M400

At a Glance
Product UEBO Wi-Fi Media Player (M400)
Summary HD networked media player with extensive format support and user-installable hard drive
Pros • Low cost
• User-installable drive
• Large feature set
• Wide video format support
Cons • Buggy in spots
• No native Netflix support
• Noisy fan
• Spotty metadata handling

If you're looking to bring digital music, movies or photos into the living room, you've got a lot of choices when you're shopping for a player. Compared to just a few years ago, these little multimedia boxes are getting popular, powerful and more reasonably priced.

In this review, I'm going to check out one these players, the M400 from UEBO. This little box, retailing in the $175 range, promises to play anything you throw at it, including HD video, ripped DVDs, numerous audio formats and more. And it advertises the ability go online for even more content including favorites such as YouTube, Internet radio stations, photo-sharing sites, video podcasts and anything you can view with its own on-TV web browser. And if that's not enough content, you can purchase a subscription to PlayOn, install a server on your local Windows system and this box will give you access to biggies such as ESPN, CNN, NetFlix, Hulu and more.

Setup

Figure 1 is the back panel of the M400 where you can see the various options you'll have for hooking it up to a TV.

Back Panel

Figure 1: uebo M400 Back Panel

HDMI, component and composite connections are shown on the left along with standard RCA analog stereo audio jacks. For digital audio, in addition to the HDMI you can choose between optical and coax. Along with the Wi-Fi antenna (802.11g) you'll also notice a Gigabit Ethernet port for wired use.

At the far right, you can see the opening for a fairly large fan. Unfortunately when in use, the fan was noisy enough that I noticed myself turning the volume up on the TV to mask it. You can't see it in this photo, but on the right side there are two USB 2.0 ports, one USB 3.0 port, plus a slot for an SD card. If you are going to use your own external drive, formats of FAT, FAT32, NTFS, EXT3 are documented as supported, but I also found an HFS drive formatted for use on my Mac also worked fine.

For internal storage, the M400 has the ability to use a dedicated user-supplied SATA drive for content. Figure 2 shows the bottom opened up for drive installation.

Drive Installation

Figure 2: uebo M400 Drive Installation

Looks easy enough, but it was a bit of a pain getting the screws back in place as metal shields inside slide around, and the white cables shown above on the right of the box leave very little room for the drive to move into its proper position.

Figure 3 shows the remote for the unit.

Remote

Figure 3: uebo M400 Remote

The remote worked well enough, but it's not backlit. So if you plan on using it in a darkened, room you might have problems.

When the device was up and running, I measured the power usage with no internal drive installed as 7 W vs. 14 W with an internal drive in use. When powered off, the unit shut all the way down so there was no measurable power usage and the fan was finally silent.

Besides the annoyance with getting a drive installed, setup for this box was fairly straightforward. I connected it to my TV, plugged in an Ethernet cable, powered it up and was presented with the top level menu as shown in Figure 4.

main_menu

Figure 4: uebo M400 Main Menu

In general, the user interface for the box was well done with attractive graphics and fluid interactions. But there were warts. The M400 has a number of on-screen messages that display on top of the UI. These messages look more like engineering debugging messages rather than relevant consumer information message.

For example, when fetching content across the network, I'd always get a "Testing Network Speed" message followed by a speed readout in "Kbits/sec". And every time the box powered on, I'd see a "Starting NAS" message followed by a "Restart NAS" message. These are interesting to me as a techie, but likely not relevant to most users.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,I've been using an AC68U together with some HomeKit devices for quite some time, and it has been performing well. However, some weeks ago I bought ...
HiDoes anyone have any experience with this newer SNB solution from Aruba? There are very few reviews and I know only the classic Aruba AP / IAPs whic...
Hi,I've been tring to read some giudes on what the different channels does but not really got the hung of it. I am a complety noob regarding wifi and ...
I got OpenVPN setup and everything is working. I have the client currently running on iOS.What I'm wondering is if there's a way to have the VPN conne...
I want to know how to get the backup of Google App from my PC. I want to transfer my office from another place, so want to get all the Google account ...

Don't Miss These

  • 1
  • 2
  • 3