Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Sponsored content is created in collaboration with advertisers by SmallNetBuilder's custom content development team. We and/or our sponsors write the posts based on information that our sponsors provide.

We only accept Sponsored Posts from companies whose products and services we think our readers will find valuable and/or interesting. If we determine that the companies we describe in these posts do not meet this criteria or provide shoddy products or services, we will not continue to run Sponsored Posts about them.

See more examples of Sponsored Posts here. If you have any questions about Sponsored Posts or other SmallNetBuilder sponsorship opportunities, please contact us.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello,I'm (re)building a network for a small school. As a Linux sysadmin, I don't have much hands-on experience with networking hardware (I usually st...
- DoS protection was enabled- unreplied UDP timeout is set to 15 to help avoid potential NAT corruption with SIP clients- 2.4 Ghz running at 53C, CPU ...
My setupVirgin Media Hub 3 in modem only mode, Line is maxed at 352 Mbs RT-AC68U running Merlin 384.8_2PC running ethernet connection directly to the ...
RAX120 Firmware Version 1.0.0.64 Enhancement or Bug Fixes:Supports WPA3.Fixed some Web GUI minor issues.Firmware upgrade instructions:Note: To avoid ...
Hi guys,Have been using Voxel .62 firmware and i had set it to reboot everyday 5am using kamoj's commands. Today when i woke my wifi was not working a...

Don't Miss These

  • 1
  • 2
  • 3