Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Items tagged with: WRE54G

How To: Manually Setting Up the Linksys WRE54G Wireless-G Range Expander - Update

Linksys WRE54GOur How To for configuring Linksys' WRE54G has been popular, but sadly out of date. Reader Alan Cates provides an update that matches the latest Rev 3 series firmware.

Linksys WRE54G Wireless-G Range Expander reviewed

Linksys' Wireless-G Range Expander pitches itself as a painless way to expand your wireless network's range. Unfortunately, we found it to be an interesting concept, but deliver far short of its promises.

How To: Manually Setting Up the Linksys WRE54G Wireless-G Range Expander

Linksys' WRE54G Wireless-G Range Expander [reviewed here] is a WDS-based 802.11b / g repeater that Linksys says works only with its WAP54G access point and WRT54G and WRT54GS wireless routers. But with a little effort, you can get it to function with any 802.11b or g product that supports WDS-based bridging and/or repeating.
Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Been running this RT-AC86U for a little over a month now. 1st thing I did was to load Merlin firmware which seems to be running fine. A short while b...
I'm trying to build NoDogSplash on AsusWrt Merlin 384.14. Compile is fine, configuration also ok. But when I start nodogsplash, it complaining that ip...
I just replaced my Asus 1900P running Merlin with a Netgear r7800 running Voxel 1.0.2.72SF. So far it seems to be running well. Was curious if there a...
Hi Guys I'm totally new here, so forgive my ignorance. I've setup an RT-AC5300 at my in-laws home and put the Sky hub into Modem-Only mode (well, disa...
Hi. Noticed a few people in other posts mentioning that they use a higher end router as a node. I was thinking of doing this but not sure if it would ...

Don't Miss These

  • 1
  • 2
  • 3