Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Product Rank: AC Router

15 products found  [BACK] 
[Switch To Sort By PRICE]

#10
50.9

AC4000 class Broadcom-based 3x3 tri-band router with two MU-MIMO enabled 5 GHz radios.

$ 188

#11
54.3

Broadcom-based 3x3 AC router with Gigabit Ethernet ports, USB 2.0/3.0 storage and printer sharing and MU-MIMO support

$ 155

#12
55.6

Second generation Broadcom 802.11ac AC1900 router with storage sharing USB 2.0 & 3.0 ports and OpenDNS based parental controls

$ 150

#13
58.8

First three-stream AC3200 router based on Broadcom XStream technology with two 5 GHz radios

$ 249

#14
65.5

Qualcomm-based 4 stream AC2600 class router focused on network security

$ 155

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I'm looking for a Gigabit switch that actually has 1Gb throughput at a reasonable price.Up until today I was using a DLink DGS105, 5 port gigabit swit...
I'm new here. Need advice. I currently have a single Airport Extreme running in bridge mode - no extenders - not using the FIOS wi-fi (radios are off)...
Hi ,my AC66U with 380.66_6 stopped showing the 5GHz wifi.The settings are all ok and on the Web UI the 5GHz is enabled.The dmesg show that the eth2 wh...
Hi there, i'm looking to replace an old apple router i have, and have been looking at the asus rt-ac88u. however, i'm also aware that asus has just re...
I just wanted to start a new thread to discuss raspberry pi combined with R7800. I don't know if other people have an interest in the raspberry pi but...

Don't Miss These

  • 1
  • 2
  • 3