Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools
   

Ranker Performance Summary
Linksys RE6700
AC1200 AMPLIFY Dual-Band Wi-Fi Range Extender

Print 

Test Notes:
Firmware tested: 1.0.01.010

# 3 for Total Extender (1.2)
# 1 for 2.4 GHz Extended Throughput (2.0)
#3 for 2.4 GHz Downlink [16.649 Mbps]
#1 for 2.4 GHz Uplink [29.1 Mbps]
# 3 for 5 GHz Extended Throughput (3.0)
#3 for 5 GHz Downlink [39.368 Mbps]
#3 for 5 GHz Uplink [30.561 Mbps]
# 1 for 2.4 GHz Wired Throughput (1.0)
#1 for 2.4 GHz Wired Downlink [35.821 Mbps]
#1 for 2.4 GHz Wired Uplink [51.949 Mbps]
# 2 for 5 GHz Wired Throughput (2.0)
#1 for 5 GHz Wired Downlink [78.714 Mbps]
#3 for 5 GHz Wired Uplink [73.605 Mbps]
Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

One of the reasons I just bought an AC68U was because I wanted the Traffic Analyzer.Apparently enabling this requires "that your information will be c...
Im sure this question has been asked before but I am trying to connect my AC3200 to a Meraki MX64. MX64 supports L2TP with PSK. Asus Merlin doesnt hav...
Hey allSo i have two netgear switch models.I have two nighthawk s8000 and two netgear GS 108's. Both 8 ports. My cable is 1 gigabit and and my system ...
So, I currently have 2 routers. One is a Linksys and the other is an ASUS, I don't think models really make a difference in the scenario. Basically, I...
When I click on "guest Network" I get this screen instead of the normal setup screen. Any ideas? total noob here...thanks

Don't Miss These

  • 1
  • 2
  • 3