Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

This Finder is for non-routing wireless Access Points.
Use the Router Finder for Wireless Routers.
Use the Wireless Adapter / Bridge Finder for those products.


   
1 product found
 AC1200 Dual Band Access Point
ProductAC1200 Dual Band Access Point
LAPAC1200
CompanyLinksys
Summary

Qualcomm-based AC1200 class 2x2 access point with PoE

ReviewRead review
WebsiteVisit Company Website
Date added2017-11-08
Price$ 187
Check Amazon
Features
Port TypeGigabit Ethernet
Ports2
PoE802.3at
CPUQCA9557
SwitchAtheros AR8035 gigabit Ethernet PHY
RAM (MB)16
Flash (MB)16
FirmwareV1.1.02.000
Captive Portal
Cloud Mgmt
Web Mgmt
S/W Controller Mgmt
AP Controller
VLAN
Wireless Backhaul
Client Bridge
Mesh
NotesWireless backhaul uses WDS
Wireless
ClassAC1200
# of streams2
BandBoth
Band Steering
AP Load Limiting
Roam AssistNone
Auto Tx Power
Auto Channel Mgmt
DFS
MU-MIMO
Client Isolation
Radio 12.4 GHz: In QCA9557 + SiGE SE2565T 2.4 GHz power amp (x2)
Radio 25 GHz: QCA9882 + Skyworks SE5003L1 5 GHz power amp (x2)
FCC IDQ87-LAPC1200
Antennainternal pcboard dipole (x2)
Antenna Upgradeable
ConnectorN/A
RADIUS
Schedule
SSID #8
NotesBand steering 2.4 to 5 GHz only
QoS
TypeB/W
DirectionBoth
Auto
NotesBandwidth limit is by SSID
Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,Before I had one time where after a power outage config. reset to factory defaults... (just flashed config. and solved it)But this time was differe...
Hello,I've been using asuswrt-merlin firmware for quite some time in my AC87U router. I was running version 384.9 since today when I decided to upgrad...
I want to first of all thank my Loyal followings of #Nobody.Here is another @SomeWhereOverTheRainBow thread-cast#my-first-one-everList of things neede...
This is a bit of a long and complicated problem, and it is in two parts... so please bear with me.I have the following equipment.A Plusnet one hub (I ...
I would like to be able to tie OPENVPN to a specific SSID or LAN port, e.g I want default traffic go out on the Internet, but specific devices to use ...

Don't Miss These

  • 1
  • 2
  • 3