Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools
   

Ranker Performance Summary
Ubiquiti UAP-AC-PRO
802.11ac PRO Access Point

Print 

Test Notes:
- Retested with Revision 10 process using 3.8.6.6650 firmware & Unifi 5.5.20 controller
- Revision 9 process using 3.7.40.6115 firmware & v5.4.11 Unifi controller

# 4 for Total Wireless (62.5)
# 3 for 2.4 GHz Avg. Throughput (3.0)
#4 for 2.4 GHz Avg. Downlink Throughput [35.6545 Mbps]
#2 for 2.4 GHz Avg. Uplink Throughput [41.4591 Mbps]
# 2 for 2.4 GHz Peak Throughput (2.5)
#3 for 2.4 GHz Peak Downlink Throughput [255.822 Mbps]
#2 for 2.4 GHz Peak Uplink Throughput [273.217 Mbps]
# 4 for 2.4 GHz Range (4.0)
#6 for 2.4 GHz Downlink Range [8.4 Mbps]
#2 for 2.4 GHz Uplink Range [16.1 Mbps]
# 5 for 5 GHz Avg. Throughput (5.5)
#4 for 5 GHz Avg. Downlink Throughput [97.4812 Mbps]
#7 for 5 GHz Avg. Uplink Throughput [77.1375 Mbps]
# 1 for 5 GHz Peak Throughput (1.0)
#1 for 5 GHz Peak Downlink Throughput [725.724 Mbps]
#1 for 5 GHz Peak Uplink Throughput [594.928 Mbps]
# 4 for 5 GHz Range (3.5)
#4 for 5 GHz Downlink Range [21.9 Mbps]
#3 for 5 GHz Uplink Range [48.9 Mbps]
Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

It looks that while Samba in Merlin shares main admin login and password, the number of SMB connections is limited to 1, regardless of configured in c...
Hello Snb community !I am new to Routers, Assus and Merlin, If i may I have a question for the community.I understand how to locate and Install softwa...
Of course you can open the WebUI to get your public ip address, but how about getting it programmatical?Actually, it's simple, just add this line to '...
Hello. I use Merlin 384.13. Is there a way to enter a system command? I understand Merlin is not WRT however to clarify what I am talking about on WRT...
Hi all,I just moved into a new 2-story house with pre-existing coaxial wiring, but its not wired with CAT5 like my old place. My current setup is:Arr...

Don't Miss These

  • 1
  • 2
  • 3