Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools
   

Ranker Performance Summary
Zyxel NWA1123-ACv2
802.11ac Dual-Radio Ceiling Mount PoE Access Point

Print 

Test Notes:
Revision 10 process using V5.10(ABEL.2) firmware

# 3 for Total Wireless (46.7)
# 3 for 2.4 GHz Avg. Throughput (3.0)
#3 for 2.4 GHz Avg. Downlink Throughput [38.1682 Mbps]
#3 for 2.4 GHz Avg. Uplink Throughput [36.1182 Mbps]
# 7 for 2.4 GHz Peak Throughput (7.0)
#7 for 2.4 GHz Peak Downlink Throughput [122.281 Mbps]
#7 for 2.4 GHz Peak Uplink Throughput [137.467 Mbps]
# 2 for 2.4 GHz Range (2.0)
#2 for 2.4 GHz Downlink Range [16.8 Mbps]
#2 for 2.4 GHz Uplink Range [15.7 Mbps]
# 2 for 5 GHz Avg. Throughput (3.0)
#4 for 5 GHz Avg. Downlink Throughput [95.3688 Mbps]
#2 for 5 GHz Avg. Uplink Throughput [170.219 Mbps]
# 8 for 5 GHz Peak Throughput (5.5)
#7 for 5 GHz Peak Downlink Throughput [399.48 Mbps]
#4 for 5 GHz Peak Uplink Throughput [435.23 Mbps]
# 2 for 5 GHz Range (1.5)
#1 for 5 GHz Downlink Range [51.5 Mbps]
#2 for 5 GHz Uplink Range [58.6 Mbps]
Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello,I've been using asuswrt-merlin firmware for quite some time in my AC87U router. I was running version 384.9 since today when I decided to upgrad...
I want to first of all thank my Loyal followings of #Nobody.Here is another @SomeWhereOverTheRainBow thread-cast#my-first-one-everList of things neede...
Hi,Before I had one time where after a power outage config. reset to factory defaults... (just flashed config. and solved it)But this time was differe...
This is a bit of a long and complicated problem, and it is in two parts... so please bear with me.I have the following equipment.A Plusnet one hub (I ...
I would like to be able to tie OPENVPN to a specific SSID or LAN port, e.g I want default traffic go out on the Internet, but specific devices to use ...

Don't Miss These

  • 1
  • 2
  • 3