Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Features

Introduction

The Wi-Fi Alliance and IEEE 802.11 Task Group i have finally heard the voice of the marketplace.

I'm not sure whether the Halloween release of the announcement of a security solution called Wi-Fi Protected Access (WPA) was an inside joke or what. But I'm glad that someone finally came to their senses and realized that if they had waited the additional one to two years that the IEEE said it was going to take, that the marketplace was either going to decide for them, or create a fragmentation that would take years (if ever) to pull back together.

WPA is a subset of the IEEE 802.11i draft standard and is designed to be forward-compatible with 802.11i when it is finally published. The Q&A (PDF format) on the Wi-Fi Alliance's website says that WPA was created when "several members of the Wi-Fi Alliance teamed up with members of the IEEE 802.11i task group". Whether these folks jumped at the chance or had to be pushed is covered in the next section. But no matter how messy the birthing process, WPA seems to be a pretty good improvement over the present sorry state of WLAN security by providing improved encryption and simple, but robust, user authentication, that even home wireless networkers will be able to use.

Although the Wi-Fi Alliance is careful to point out that WPA isn't a standard, but instead a "specification of standards-based, interoperable security enhancements", it looks like it might as well be one. WLAN equipment vendors are lining up behind the spec with press releases issued by Intersil, Agere, Atheros, Funk Software, and Atmel concurrent with the Wi-Fi Alliance release.

But where did WPA come from? Any why now?

More Wireless

Zyxel logo

Wi-Fi Mesh System Secrets - Here's how to get the most out of your whole home mesh WiFi system.

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I recently decided to go full-retard and on a recent trip to the US I bought a GT-5300, an RT-5300 and an RT-AC88U. My idea is to set up an AiMesh net...
Hi Community. I currently got a AC68U running Merlin 384.4_2. I recently purchased a AC86U. I would like to use my new 86U as my router in my upstairs...
I have the RT-AC68U with Merlin's 384.4. All I want to do is make Usenet binary downloads the lowest priority. They all go through port 563 using SSL....
Hi all I just got a qnap ts-453a raid device and started a raid 10 array using four 8tb has drives. Is it normal for a blank raid array to take ~40 ho...
I have a network with 35-40 clients. network is running two 86u's in aimesh with smart connect. stability and performance have been good with 1 except...

Don't Miss These

  • 1
  • 2
  • 3