Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

Amped Wireless logoAmped Wireless has added a simultaneous dual-band 802.11n router to its line of "long-range" wireless products.

The R20000G High Power Wireless-N 600mW Gigabit Dual Band Router is a simlutaneous dual-band 802.11n router supporting link rates up to 300 Mbps on each radio.

Amped's new top-of-line router sports dual 600mW 2.4 GHz amplifiers, dual 5.0 GHz amplifiers and two dual-band high gain 5dBi antennas.

Amped Wireless R20000G

Amped Wireless R20000G

Other features include Gigabit WAN (1) and switched LAN (4) ports, one USB 2.0 port for SMB/CIFS and FTP storage sharing and wireless Guest network support.

The R20000G is available from Amped today for $179.99 with free shipping, one year limited warranty and 30 day money-back return guarantee.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi allI've spent a week tracking down a VERY annoying problem. Every few seconds, my WiFi (any band/channel) on my desktop computer encounters packet ...
I don't know where the industry is heading, but I'm starting to understand that I am a minority for wall mounting my routers, and prefer them in white...
I read the manual but couldn't find out what's the difference between "Time", "Block" and "Disable" in Time Scheduling. What are those options used fo...
HelloNoob question here..Is there any way to easily isolate a wired client from the rest of the local LAN? I want to deny a wired IOT device access to...
I recently added some IP cameras to my network to work with Blue Iris. Once they were connected, i logged into each camera and set a static IP on them...

Don't Miss These

  • 1
  • 2
  • 3