Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless News

NETGEAR logoNETGEAR has announced two business access points with 3x3 radios.

The ProSafe WNDAP620 and WNDAP660 are both 450 Mbps 3x3 Wireless-N Dual Band access points. The 620 has a single radio for selectable 2.4 or 5 GHz operation and the 660 has two radios for simultaneous operation on both bands.

Both products include wireless intrusion detection and prevention, device-based QoS and RF management. The WNDAP660 also includes band steering to load balance clients between 2.4 and 5 GHz.

NETGEAR WNDAP620

NETGEAR WNDAP620

Other features include 802.3af and 802.3at PoE support, WDS bridging and repeating, dual internal dual-band antennas with option for three external antennas. Management is via HTTP/HTTPS web interface, SNMP v1, v2c or SSH/SSL command line.

The WNDAP620 is available now for $715 and the WNDAP660 follows next month for $829. Both prices are MSRP. The APs carry a lifetime limited warranty and their power supplies are warrantied for three years.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

So, this is a thing that has bugged me for a long time. When I am on the Network Map page, I see the clients connected with 31 connected clients. Then...
I ran into this issue early today and figure to upgrade the firmware to 384.8_2 since it is available (hoping that fixes the issue)...But I still can ...
Hi..This is related to Asus RT-AC88U firmware version 384.8_2 but I always get "Cannot assign requested address" and "Failed to get IP for interface e...
I have one Asus 68u repeater mode in the basement connected wirelessly to a bell parent modem/router on main floor. Only wifi is working on Asus route...
While waiting for Amazon to deliver the new GT-AX11000, I have opened this thread to discuss this new flagship router.I am going to pair it with my ex...

Don't Miss These

  • 1
  • 2
  • 3