Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Reviews

Introduction

Updated 6/25/2009

MetaGeek Wi-Spy 2.4 GHz Spectrum Analyzer

At a Glance
Product MetaGeek Wi-Spy 2.4 Spectrum Analyzer
Summary Suprisingly good, most inexpensive 2.4 GHz spectrum analyzer you can buy.
- Consists of USB dongle and Win XP / 2000 application
- Linux / MacOS software also available
Pros • Real RF Spectrum analysis for $99
• Good detection range
• Recording and playback
Cons • Misleading amplitude information
• Fixed amplitude range
• Coarse frequency resolution

When I first heard about a 2.4GHz spectrum analyzer for $99 bucks, I figured someone must have slipped a decimal point. But it turns out that MetaGeek's Wi-Spy is real, does work, and can really be yours for a Benjamin, with change back to boot!

What it is

Wi-SPY consists of a small USB module that's about the size and form factor of a small USB flash drive and a small software application. Figure 1 shows that the module is a JUNO-USB dongle, manufactured by Unigen, an OEM / ODM of memory, DC-DC power converter, wired and wireless communication, and flash products.

Unigen USB receiver

Figure 1: Unigen USB receiver

The Wi-Spy module is a Cypress WirelessUSB design, using a Cypress CYWUSB6934 LS 2.4GHz DSSS Radio SOC and CY7C63743 enCoRe USB Combination Low-speed USB & PS/2 Peripheral Controller. The key relevant tidbits that I picked up during a quick read of these datasheets is that the radio has a receive sensitivity of -90 dBm and has a top data transfer rate of 62.5 kbits/sec.

The software that comes with Wi-Spy runs on Win XP and 2000 only and requires the installation of Microsoft .Net Framework 1.1 or higher. The dongle is USB 1.1, so will also work with USB 2.0. If you're not a Windows fan, you'll be happy to know that Mike Kershaw, author of Kismet, has developed an open source version of the Wi-Spy software that runs on Linux, BSD, and Mac OS X. The blurb on MetaGeek's website says "This application is under heavy development and is quickly progressing to become feature-equivalent to the Windows Wi-Spy software." I worked only with the Windows version, but you can find out more about Mike's version here.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Now that I have a number of smart devices (thermostat, security cams, etc) in my home, I'm finding internet outages a bit more than a nuisance when I'...
Hi, I noticed an anomaly with using OpenVPN with Merlin and thought I'd ask here. Scenario is:1) connect using my Android phone to the VPN server host...
New to the forum and hoping to find some answers. I have a N2350 and set up as my iTunes server. I'm starting to upload my music but I can't seem to d...
My sister is building a house caddy-corner to my Parents to take care of them and I've taken it upon myself to help them link their networks together....
I have a Honeywell Lyric T6 thermostat connected to the internet via a Linksys Wifi AP that is hooked up to an Asus RT-AC88u router and since several ...

Don't Miss These

  • 1
  • 2
  • 3