Yes, as you might expect, it appears that Draft 802.11n is actually used in the products. The FCC report for the WRT100 router shows test results for both 20 and 40 MHz Draft 802.11n OFDM modes, including spectral plots.
So why not say so? My guess is that one of the reasons might be to avoid price erosion of Linksys' Draft 11n products. After all, if you can get the benefits of Draft 11n for a hundred bucks, why pay more?
Related Articles
-
Linksys adds MIMO WLAN line
- Are You Playing the Draft 802.11n Shell Game?
Support Us!
If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!Don't Miss These
-
How Much Total Throughput Can Your Wi-Fi Router Really Provide?
Read MoreIt's harder than you think for that expensive router of yours to deliver all the throughput the big number on its box promises. We show you why.
-
Router Or Wi-Fi System: How To Choose
Trying to decide between a router and a Wi-Fi System? This experiment should help you choose wisely.
-
Wi-Fi 6E: The Basics
Read MoreUpdated: Here's a quick primer on Wi-Fi 6E.
-
Wi-Fi Ping Spikes: Causes and Fixes
Read MoreWi-Fi ping spikes aren't always caused by a poor connection. Your router settings could be to blame.
-
Wi-Fi Roaming Secrets Revealed
Read MoreEver wonder what happens behind the scenes when Wi-Fi devices roam, or more likely don't? We'll show you why the "seamless" roaming Wi-Fi gear makers promise is still as elusive as a Yeti.
-
How To Fix Wi-Fi Roaming
Read MoreWe reveal the secrets of why your devices don't always connect where you want them to and what you can do to fix it.
- 1
- 2
› ‹ - Are You Playing the Draft 802.11n Shell Game?