Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Basics

Making Our Choice

If your applications are simple - Internet sharing, printing, file sharing - if you only have three or four systems that are in fairly close proximity, if your budget allows it and if speed isn't your primary concern, wireless might be a better option for you. However, if you are going beyond these standard Internet functions and must share your Internet connection with devices other than computers, and if you are not put off by cutting holes in your wall, then wired switched 100-Mbit Ethernet is a better option.

If your kids have their own computers and spend a lot of time playing networked multiplayer games either over the Internet or against each other, for networked gaming performance a wired 100-Mbit solution is clearly best. In our case, we currently have two boys at home that enjoy networked gaming on their own computers, as well as an Xbox that is Xbox Live enabled in our family room. In addition, we use Audiotrons to stream MP3s across our home network to various places within the house. This means that we push the capabilities of the network when both boys are using it and my wife and I are also using it for work and research.

DLink DLW-810+

DLink DLW-810+

In our situation, we chose to go with a hybrid strategy of all three options. We elected to include 100-Mbit wired, 802.11b wireless, and 1000-Mbit input for two of our servers, as well. While this certainly is not the typical configuration that most home network users would choose, after much discussion it was obvious that we needed to consider current and future use; this resulted in our decision to install a state of the art solution that would address all of the possible uses of our network. I also spend a considerable amount of time working in my home lab doing testing and such, so we had to factor this into the solution, as well.

More Basics

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Sorry for this being such a noob question but what Wi-Fi speed should one expect from an RT-AC68U using 5Ghz?I'm lucky enough to have gigabit fibre (L...
HiI just bought a used AC68U, but I can't figure out which HW version it is.On my old AC68U the white sticker on the back says H/W A1, but the new one...
Using Asuswrt-Merlin 384.13 on a RT-AC66U-B1 router. "QoS WAN/LAN Bandwidth Monitor" is working very well for internet traffic: I set media streaming ...
hi all,I finally swallowed my pride, ditched my AiMesh setup and reverting back to using multiple APs sharing the same SSID. The dream of having a cen...
I have a 68U at a friend's house and the wireless is weak, so I'm planning to use powerline adapters seen here: https://www.amazon.com/gp/product/B01M...

Don't Miss These

  • 1
  • 2
  • 3