Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Basics

Routing and QoS

Some routers have non-NAT routing features. This means that instead of manipulating data so that many computers can share a single IP address, the router can properly direct traffic among all computers on networks that use more than one range of IP addresses. One of the key functions performed is making sure that all computers know the IP addresses of the various network gateways and DNS servers and where to send data that's intended for computers that are on different subnets.

Note that this feature does not solve the problem of getting Microsoft File and Printer sharing to work so that all machines on all subnets can see and communicate with each other. That requires a Domain controller, which you get by either adding a Microsoft-based server or machine running SAMBA.

There are two kinds of additional routing features. Static routing requires that you manually enter subnet information into the router. Dynamic routing uses RIP (Routing Information Protocol) to allow RIP-aware devices to share network routing information automatically.

If this explanation isn't that clear to you, don't worry too much. If your network were complicated enough to require these functions, you probably already know more about them than we do!

Quality of Service (Qos)

QoS is the ability of the router to prioritize the handling of some packets over others. This is most useful for applications requiring "real-time" response, such as gaming, VoIP, and multimedia streaming. It also holds the promise of being able to allow control of the bandwidth allocated to specific users and/or applications. But as I write this in late spring 2006, QoS is still in its infancy as far as most consumer routers are concerned and inconsistently supported.

For example, some of the most expensive MIMO routers such as Netgear's RangeMax 240 have no QoS features at all, while less expensive products such as D-Link's Gaming routers have Ubicom's sophisticated automatic StreamEngine QoS technology (D-Link calls this "GameFuel". But while StreamEngine is slick and works well, it works for upstream traffic only. This makes it useless for keeping little Susie's music downloading habit from dominating the home Internet connection. And as Figure 10 shows, QoS controls have a way to go in order to be user-friendly.

D-Link GameFuel QoS settings

Figure 10: D-Link GameFuel QoS settings

The good news is that the emphasis on web-based multimedia applications should push manufacturers in the direction of implementing QoS more consistently and across their product lines. In the meantime, however, don't assume that your router has QoS features.

More Basics

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

v1.0.1 Updated 2020-05-20 Track your cable modem's stats (such as signal power levels), on your router. Graphs available on the Addons page of the W...
Hi, I'm running Merlin 384.19 on rt-ac86u. This morning, I disabled pretty much every native service the rt-ac86u has to offer, I think the media serv...
This thread is for the discussion topic : unbound_manager script. As per the GitHub Hints/Tips: Differences between the operational modes​ E...
When I connect my laptop directly to the Spectrum modem I get about 230 mbps. When I connect the modem to the router it is only in the low 90s. All th...
So I'm quite new to the whole router business and my knowledge is very limited at the moment, so bare with me My current router is a piece of s**t my ...

Don't Miss These

  • 1
  • 2
  • 3