Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN How To

Step 1 - Enable Wake on LAN

Most motherboards today have a built in NIC and support Wake on LAN functionality. You'll have to go into the BIOS Power Options to enable it. The process is different in each motherboard, but pretty straightforward.

On an Intel CPU ASUS P4C800 board, the option is called Power On By PCI Devices in the APM (Advanced Power Management) menu. On an AMD CPU MSI K8N board, the option is called Resume by MAC LAN.

Figure 2 below is screenshot from a laptop BIOS. You can see the option is called Power Management and there is a selection for Wake on LAN.

BIOS view

Figure 2: A view of a laptop BIOS

If you're using a separate PCI LAN card, you'll have to enable WOL functionality for PCI devices in your BIOS. Note that if you're using an older motherboard with a PCI 2.1 or older bus, you'll likely need to connect a 3-pin WOL cable from the NIC to the motherboard. This cable is typically not needed in newer computers using a PCI 2.2 or newer bus.

Finally, check the Advanced Properties of your network card. In Windows, go to Start-Settings-Network Connections to ensure Wake functionality is enabled. An example is shown below in Figure 3.

NIC Properties

Figure 3: The Advanced Properties tab of the NIC properties

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I'm trying to figure out why my RT-AX86U isn't using 160 MHz channels. I'm using the latest stock Asus f/w 3.0.0.4.386_41535-g1caa24a, have enabled 16...
Greetings everyone,Long time lurker, super appreciative of what this community has done for this lurker in the past - Proud user of Merlin in the past...
I have an ADSL modem coming into a very small panel near the entrance to my home. The panel is big enough to house a 68U or maybe 86U. Inside the pane...
Continuation of the first thread which covered beta 1 through 3.Beta 4 is now available. Changes since Beta 3:Code: 6adb157bea asd: disable asd on al...
I am having an issue where I am unable to create CA files for my ipsec.ME@RT-AC88U-A038:/jffs/ca_files# pki --gen --size 2048 --outform pem > /jffs/ca...

Don't Miss These

  • 1
  • 2
  • 3