Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

Updated

HotBrick Network Solutions recently introduced the VPN 800/2G, a dual WAN router with IPsec endpoint capability.

The router supports 9 load balancing methods and automatic failover on its dual 10/100/1000 Ethernet WAN ports. A built-in 8 port 10/100 plus two 10/100/1000 switch provides LAN client connection.

100 simultaneous IPSec VPN tunnels with DES, 3DES and AES encryption support remote client or gateway-to-gateway connection. HotBrick's standard VPN client has no node license limitation.

Other features include a SPI+NAT firewall, one-to-one NAT and port-based QoS for bandwidth management.

The VPN 800/2G is available immediately at an MSRP of $899.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I tried to set it up, but I am failing - not for the first time. This time, I have a very basic scenario, one PC is solely a torrent box atm, so I wou...
Previously was using Merlin on my R7000 and I made a post about the WAN MAC Addres showing an old MAC Address from my previous ONT.... Now I am runnin...
I just installed merlin on my AC88U and i see all these settings in fq_codel area but when ever i select anything it doesn't change and am i supposed ...
Dears,From time to time my Asus RT-AC88U with Asuswrt-Merlin 384.8_2 firmware stops loading images and videos from Facebook. Sometimes is Whatsapp ima...
Hey all,I've been using a 3 router AiMesh (AC66u B1, AC5300, GT5300) setup for awhile. They are all connected via Ethernet. I did a firmware (3.0.0.4....

Don't Miss These

  • 1
  • 2
  • 3