Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN News

Linksys logoLinksys today unveiled the first available HomePlug AV2 adapter kit.

The Linksys PLEK500 Powerline HomePlug AV2 Kit uses HomePlug AV2 SISO technology. HomePlug AV2 SISO provides maximum link rates of up to only 500 Mbps vs. the Gigabit link rate that AV2 MIMO products will support. This is the same maximum link rate as older "HomePlug AV 500" products.

Linksys says that the AV2 adpaters have improved performance and coverage over "500 Mbps" powerline adapters due to the newer technology.

Linksys PLEK500 Powerline HomePlug AV2 Kit

Linksys PLEK500 Powerline HomePlug AV2 Kit

The kit includes two adapters that plug into any three-prong 120V outlet. Each adapter has a single Gigabit Ethernet port that can be connected to a switch to connect multiple devices.

The Linksys Powerline HomePlug AV2 Kit is available now, listing for $129.99.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

One of the reasons I just bought an AC68U was because I wanted the Traffic Analyzer.Apparently enabling this requires "that your information will be c...
Im sure this question has been asked before but I am trying to connect my AC3200 to a Meraki MX64. MX64 supports L2TP with PSK. Asus Merlin doesnt hav...
Hey allSo i have two netgear switch models.I have two nighthawk s8000 and two netgear GS 108's. Both 8 ports. My cable is 1 gigabit and and my system ...
So, I currently have 2 routers. One is a Linksys and the other is an ASUS, I don't think models really make a difference in the scenario. Basically, I...
When I click on "guest Network" I get this screen instead of the normal setup screen. Any ideas? total noob here...thanks

Don't Miss These

  • 1
  • 2
  • 3