Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

Logging and other Features

The VP41's logging is the same as provided in the rest of the Linksys router product line. Logging is disabled by default, but once you turn it on, it will separately log Outbound and Inbound traffic. LAN IP, Destination URL/IP, and Service/Port Number are logged for Outbound traffic, and Source IP and Destination Port Number are logged for Inbound requests.

NOTE!NOTE! If you change any of the VP41's settings, both logs will be cleared when you Apply the changes.

If you want an ongoing record of the logs, or need log analysis features, you can set an IP address that the logs will be sent to. Linksys uses SNMP TRAP messages broadcast on UDP port 162 to send the logs, and there are a number of applications available from both Linksys and third parties that will crunch the logs to your heart's delight.

Let's see, what else can I tell you? How about:

  • you can set the router's MTU (Maximum Transmission Unit) value (useful in getting some PPPoE-based connections to work)
  • you can set static routes (useful in networks that have more than one subnet)
  • dynamic routing protocols RIP1, RIP1 compatible (transmit only) and RIP 2 send and receive are supported
  • you can save and load the router's configuration
  • firmware upgrades are done entirely via web browser (after you download the zipped firmware file).

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Device: RT-N66UFirmware: 380.69Hello everyone,i attached a tp-link access point to my router and created vlans for several SSIDs.In addition i would l...
Hello, I'm looking for advice for the build in the subject line. I'm a landscape architect starting my own small office. It will be two people at firs...
Is this ok to do ? Also allow only specified ip address.I want to do this my for cousins so i don't have to go over there every time.I notice the 86u ...
Hi,I want to assign my virtual machines to a certain dhcp range.I have been playing around with dnsmasq.conf.add but cant get it to work.This is what ...
Hi allIt seems that devices on 5G-1 and 5G-2 cannot "see" each other.On Wireshark it seems some packets can't traverse from one 5G band to the other. ...

Don't Miss These

  • 1
  • 2
  • 3