Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

Installation

You can download an iso file which you can use to create a CD of Smoothwall Express 2.0 at their website here. Once created, the CD is bootable, so starting the installation for most PC's is simply a matter of turning on the power with the CD in the drive. If you don't have a CD drive on your target machine, there's also an option for performing a network install.

Smoothwall Express 2.0 installation is a very straightforward affair. Part of the reason it's simple is because you don't have very many options to choose from, which can be a good thing or a bad thing, depending on your perspective. One thing that really stands out to me about the installation is that there are no partitioning options. The Smoothwall installation will completely wipe out, repartition, and reformat the entire primary master hard disk, and apparently there's no way around it. Of course, the installation routine warns you before doing this, but it can be a little worrisome if you're not sure Smoothwall is going to work for you.

After the hard disk warning, you're prompted to configure your "green" network interface. This is where it's a good idea to be familiar with your network cards and what Linux driver they use. If you know that, then you're all set. If you don't know, then you may have to do some experimenting after the installation to figure out which cable connects to what. Smoothwall refers to network interfaces by color - "green" for the local network, "red" for the Internet, and "orange" for the DMZ (the "demilitarized" zone where web servers and such should go). Once the local network is configured, the installation will copy files to the hard disk before continuing. The rest of the installation will have you setting up your remaining network cards and other basic information like your hostname. You're also offered the opportunity to restore a configuration from a previous installation - a good thing if you're upgrading from an older version. For the most part though, the installation is pretty much automated.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi, my AC88U is operational since several years, traffic analysis was ON since the start.But when i look at graphs i can't see before 1 day data, hist...
I plan to make available a beta version of the next kamoj add-on - if there is enough interest.N.B: Voxel firmware is a pre-requisite, not an option!I...
I just picked up my XT8, updated both to the latest release firmware. So, I set them up in a mesh wireless config- a few questions:I'm getting ~400Mbp...
Asuswrt-Merlin 384.19 beta is now available (except for the RT-AX56U which won't be available for this release, due to outdated GPL code).The main cha...
Hi all,I have a ax ready phone but I can not seem to get it to connect in ax mode to the AX88U i just bought.Are there any settings I need to change t...

Don't Miss These

  • 1
  • 2
  • 3