Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

Introduction

Corinex AV CableLAN Adapter

Corinex AV CableLAN Adapter
Summary Ethernet-over-coax adapter based on HomePNA 3.0 technology. 128Mbps spec'd raw data rate, around 40 Mbps actual

Corinex AV Phoneline Ethernet Bridge

Corinex AV CableLAN Adapter
Summary HomePNA 3.0 phoneline to Ethernet bridge. 128Mbps spec'd raw data rate, around 40 Mbps actual
AV CableLAN Adapter   AV Phoneline Ethernet Bridge
Pros Cons   Pros Cons
• ~20Mbps networking via home TV coax
• Simple to set up
• Needs split line and filter to work with cable modem
• Expensive
  • ~40Mbps networking over home phone lines
• Simple to set up
• "Noisy" phones, DSL service, can significantly lower throughput or kill network
• Expensive

More LAN & WAN

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Is it possible to control LAN access via iptables? I have a bunch of IOT devices that I want to access the internet and (and this is the kicker) accep...
I recently enabled the statistics for traffic analyzer, and in the list of clients I was seeing this mac address I couldn't find on my network , I fou...
just a quick question, I have an rt-ac56u with 378.55 firmware on it, is it possible to update from 378.55 to 384.5 or is this too much of a jump??
HelloSorry if this is a repost of the same topic somewhere else.Im having issues when looking for devices at the traffic analizer page. I can see all ...
Hi all I have to put a new iptable rule. For that I have created a script and named it "firewall-start" and located it under /jffs/scripts/If I run th...

Don't Miss These

  • 1
  • 2
  • 3