Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews


Like the Parental Control and Firewall menus, the Reporting Menu (Figure 22) has a global enable/disable. The reporting is very boiled down, but I think a lot of tbe DSD-150's target buyers will like the feature.

Reporting screen

Figure 22: Reporting screen (click to enlarge)

Days that have blocked content attempts are highlighted in red while those without blocked content attempts are in green. Click on a day, the counters at right will display that day's "Child", "Youth" and "Adult hits. The "View Report" button opens a report stored at, that can't be tampered with (famous last words).

The thought here is that even if your DSD-150 were hacked, you can use this report to look at say, the five days you left the teenagers by themselves, and see what sites this client went to. Of course, if you leave your client security settings at low (remember my debugging tip?) then the DSD-150 can be removed from the LAN while you are out, and the reports will not include the web browsing that happened while the DSD-150 was removed.

Comparing the reporting web page seen with the latest firmware (1.0.3) with the reporting web page in the manual (Figure 23) it appears that D-Link has pulled some functionality. The Reporting page in the manual (gotta love "Logged In: Joe Tester") has three sub-menus that I was unable to find a way to reproduce with the evaluation unit.

Reporting screen from the DSD-150 manual

Figure 23: Reporting screen from the DSD-150 manual (click to enlarge)

From the manual, it appears that the DSD-150 has/had the ability to have log files e-mailed, some kind of device log (would be great if this showed when the DSD-150 was disconnected and reconnected), and an "accountability partner" option. I've heard people set up accountability partners to keep themselves from straying, but this is the first I've seen of a filtering device supporting such an arrangement.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello,I'll start by saying that I'm a bit of a novice with networking and I've been searching around for information about this for ages and I'm a bit...
Hi guys already few month I have following issue, and asking for community help. Got disconnections every day and usually router can't reconnect autom...
YazFi v4.1.3 Updated 2020-07-11 Feature expansion of guest WiFi networks on AsusWRT-Merlin, including, but not limited to:* Dedicated VPN WiFi netw...
Hello all,I would like to run a Rpi 4 pihole setup, Since I already am using Dns over TLS on my router ..... Can I just run a Rpi 4 pihole behind rout...
ASUS RT-AX88U Firmware version Fix CallStranger vulnerability (CVE-2020-12695)- Improved system stability. Please post your experien...

Don't Miss These

  • 1
  • 2
  • 3