Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

LAN & WAN Reviews

Other Features

The TEG-160WS system menu provides an easy-to-read display of traffic statistics by port.  In the screenshot below, you can see the packet counts on port 5, 7, 13 and 14 on my test TEG-160WS.

Traffic statistics

Traffic statistics

Security options on the TEG-160WS include support for 802.1x authentication and a Broadcast Control feature.  The 802.1x feature allows per port authentication of end devices via an external RADIUS server. 

The Broadcast Control feature is quite basic.  It can be applied only to the whole switch, not to individual ports.  When enabled, the feature allows for selecting a rate limit of 8,000-4,096,000 bytes per second, (screen shot below) protecting against rogue devices sending excessive traffic.

Broadcast Storm control

Broadcast Storm control

Port mirroring, SNMP support, and IGMP Snooping are the three other features supported by the TEG-160WS.  Any of the 16 ports on the switch can be configured to copy transmit, receive, or both traffic flows to a specific port for packet captures.  I set up a simple port mirror, shown below, to copy all traffic on port 7 and send it to port 5.

Port mirroring

Port mirroring

The TEG-160WS supports Simple Network Management Protocol (SNMP) polling and sending (SNMP traps) of messages.  SNMP messages can be sent on bootup, up/down status of any port, and errors on any port. 

Finally, IGMP snooping can be utilized on the TEG-160WS.  IGMP snooping can improve network performance when there is multicast traffic present.  IGMP snooping can be enabled per VLAN.

Competitive Comparison

The TEG-160WS faces some strong competition among inexpensive 16 port smart switches.  As you can see from my table below, the TEG-160WS comes in around $40 more expensive than the TP-Link TP-SG2216 I reviewed a couple months ago. But the TRENDnet has two years' shorter warranty and supports half the number of VLANs.

Make and Model RJ45 ports SFP ports MAC addresses Backplane (Gbps) VLANs Warranty Price
TRENDnet TEG-160WS 16 2 8k 48 256 3 years $150.72
TP-LINK TP-SG2216 16 2 8k 32 512 5 years $111.44
Cisco SG200-18 18 2 8k 32 256 Limited Lifetime $234.00
NETGEAR GS716T-200 16 2 8k 32 128 Lifetime $218.95
16 port smart switch competitive comparison

Further, the TEG-160WS lacks features found on other smart switches in this table.  Minor points are the lack of display of trunk/LAG status and switch MAC table.  But larger disadvantages of the TEG-160WS are its lack of ingress and egress bandwidth controls and basic security options, such as MAC-based filtering.

To net it out, the TEG-160WS is a basic smart switch with common smart switch features including VLAN tagging, Link Aggregation Groups, port mirroring, STP, and traffic prioritization.  But TP-LINK's TP-SG2216 is a better value with lower price, longer warranty and more features.

More LAN & WAN

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I just picked up my XT8, updated both to the latest release firmware. So, I set them up in a mesh wireless config- a few questions:I'm getting ~400Mbp...
No matter what I put for upload/download bandwidth on a new RT-AX88U on Merlin 384.18, it will peg the upload speed at my ISP's maximum speed and ping...
Any idea when the new AX86U will be supported?
After updating to 384.18, all 8 of my Nest Protect devices went offline, and I was unable to add any new Protect devices onto my account. I have one 2...
I plan to make available a beta version of the next kamoj add-on - if there is enough interest.N.B: Voxel firmware is a pre-requisite, not an option!I...

Don't Miss These

  • 1
  • 2
  • 3