Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Features

RAID 0 Setup - more

The New Volume Wizard will start (Figure 13). Click Next > and choose the flavor of new volume you want. *Hint* choose Striped (Figure 14).

New Volume Wizard

Figure 13: New Volume Wizard

Volume Flavor Dialog

Figure 14: Volume Flavor Dialog

Once you select Striped and then Next >, you'll see a drive picker to select which drives are gathered into the striped (RAID 0) array. I selected all five hard drives in the DS-500 for my stripe array (Figure 15). I then clicked Add > and surfed through the next two dialogs choosing the default (E:) for the array's drive letter, and NTFS quick format.

Drive Picker for Stripe Array

Figure 15: Drive Picker for Stripe Array

Once you click Next > in Figure 15, Figure 16 will appear and each drive indicating "Formatting" in the right column. Once formatting is finished, you'll see Figure 16 where each drive now appears as "Healthy".

Completed RAID 0 Array in XP Disk Manager

Figure 16: Completed RAID 0 Array in XP Disk Manager

Since we just set up the array with Disk Manager in Windows XP, I think what we have at the end of this process is a software RAID 0 / striped array. So, even though you bought a DS-500 which looks like a piece of hardware, this is not a hardware RAID 0. That was a little confusing to me, but when I saw the software RAID 0 performance, I got over it.

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Can I use the Android ASUS app to do a dirty update from 384.17 to 384.18?
The FCC posted this announcement to Twitter about an hour ago"The FCC has adopted new rules for the 6 GHz band, unleashing 1,200 megahertz to boost #W...
Hi guys,I don't know what this is, but it started suddenly with one of the betas in the past.. It doesn't appear directly after a reboot or a flash, b...
https://www.washingtonpost.com/tech...g-you-this-whole-time/?utm_term=.536b5c09ee5fI unplugged my Echo and Dot two years ago. But the recordings were ...
Asuswrt-Merlin 384.19 beta is now available (except for the RT-AX56U which won't be available for this release, due to outdated GPL code).The main cha...

Don't Miss These

  • 1
  • 2
  • 3