Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS Features

New Charts are now available for USB and eSATA attached backup, with drives formatted in FAT, EXT3 and NTFS. Since not all products have eSATA ports or support all three formats, you may not find a particular product in a chart.

We also have added Charts for iSCSI Target Write and Read for those products that support this feature. The test is performed using the new NAS Testbed using the same Vista SP1 filecopy test used for the NAS File Copy Test.

Since we no longer test NASes with a 100 Mbps LAN connection, we have removed all 100 Mbps NAS Charts to streamline Chart selection. Only the 100 Mbps Average Write and Read Performance charts remain, to allow access to data for older products.

Please drop us a line or post a comment to share your thoughts about these changes or if you have a question.

More NAS

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Is it possible to control LAN access via iptables? I have a bunch of IOT devices that I want to access the internet and (and this is the kicker) accep...
I have a pfSense box and need an 8-16 port managed switch to configure VLANS on both a wired network and a wireless AP. I would strongly prefer a POE ...
I recently enabled the statistics for traffic analyzer, and in the list of clients I was seeing this mac address I couldn't find on my network , I fou...
just a quick question, I have an rt-ac56u with 378.55 firmware on it, is it possible to update from 378.55 to 384.5 or is this too much of a jump??
HelloSorry if this is a repost of the same topic somewhere else.Im having issues when looking for devices at the traffic analizer page. I can see all ...

Don't Miss These

  • 1
  • 2
  • 3