Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Tags:

Today’s release means that developers can now begin designing products based on SATA 6Gb/s technology, although work continues on the specification, including advances for data streaming and better power management.

The new specification is said to keep the low cost and power of the current 2.0 spec and will maintain backward compatibility by keeping the existing SATA connector configuration. The same currently-used cables and connectors will be able to connect SATA 6Gb/s devices, although SATA-IO recommends utilizing "quality components" to ensure data integrity and robust operation at the fast 6Gb/s transfer rate.

IDC’s research says that SATA has become the primary storage interface with more than 650 million SATA hard disk drives shipped since its introduction in 2001.

SATA Revision 3.0 is expected to be completed in the second half of this year.

More NAS

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello all, I recently picked up 2x TP-LINK EAP225_V3 access points, and 1x EAP225_Outdoor. Current idea is to disable wireless on my trusty old N66U r...
Tim joined this forum on May 18th 2008. I assume that means that the forums were setup ten years ago (unless he was on a different platform before tha...
I have a new (less than 1 week old) AC86U and am running 384.5 on it.Fairly plain vanilla config with the exception of adding several static IPs to DH...
Is it possible to control LAN access via iptables? I have a bunch of IOT devices that I want to access the internet and (and this is the kicker) accep...
I have a pfSense box and need an 8-16 port managed switch to configure VLANS on both a wired network and a wireless AP. I would strongly prefer a POE ...

Don't Miss These

  • 1
  • 2
  • 3