Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

The TS-439U-RP and TS-439U-SP are 1U rackmount NASes that can hold four hot-swappable 2.5" or 3.5" SATA up to 2 TB capacity. The hardware core of each includes an Intel ATOM 1.6GHz CPU, 1GB DDRII memory and and dual Gigabit LAN ports supporting seven configurable modes including link aggregation, failover and multiple LAN.

Drives can be configured into multiple volumes using RAID 0/1/5/6/5+ spare, and JBOD. Online RAID capacity expansion and RAID level migration are supported and volumes can be optionally AES encrypted. Both models also can function as iSCSI target stores.

The TS-439U-RP includes a redundant power supply, while the TS-439U-SP ships with only a single supply, with an open bay for upgrading to a second supply.

Other features include secure FTP, encrypted remote replication, email and SMS alerts, SMB/CIFS, NFS, and AFP network file systems. The new models run QNAP's new AJAX-based V3 OS that includes a revamped web-based management GUI and EXT4 support for very large volumes and file sizes.

The TS-439U-RP and TS-439U-SP will be available this month at MSRPs of $1,199 and $999, respectively and ship with a free rackslide rail kit. The optional redundant power supply for the TS-439U-SP will be available at an MSRP of $250.

More NAS

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello all, I recently picked up 2x TP-LINK EAP225_V3 access points, and 1x EAP225_Outdoor. Current idea is to disable wireless on my trusty old N66U r...
Tim joined this forum on May 18th 2008. I assume that means that the forums were setup ten years ago (unless he was on a different platform before tha...
I have a new (less than 1 week old) AC86U and am running 384.5 on it.Fairly plain vanilla config with the exception of adding several static IPs to DH...
Is it possible to control LAN access via iptables? I have a bunch of IOT devices that I want to access the internet and (and this is the kicker) accep...
I have a pfSense box and need an 8-16 port managed switch to configure VLANS on both a wired network and a wireless AP. I would strongly prefer a POE ...

Don't Miss These

  • 1
  • 2
  • 3