Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Thecus i8500Thecus today added a 2U eight-bay rackmount iSCSI storage device.

The i8500 Storage Device is aimed at enterprise users with a hardware platform including an Intel Xscale IOP Processor, 1 GB of DDR2 RAM, dual Gigabit Ethernet ports supporting auto-failover and aggregation and a separate 10/100 port for web-based admin access.

The i8500 can be configured with single or dual power supplies and an optional RAM battery backup module. Thecus specs transfer speeds of up to 150 MB/s with a single port and 190 MB/s with dual ports.

The device supports up to 256 RAID 0, 1, 0+1, 3, 5, 6, 10, 30, 50, 60 and JBOD volumes plus 32 host cluster connections per volume, for centralized storage for up to 32 users. Up to 32 snapshot versions can be taken with full rollback capability.

The i8500 will be available next month at an MSRP of $2550.

More NAS

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi,I am trying Aimesh with a AC86U as a router node, and AC68 as a Edge Node, however, I got very bad wifi performance, and only get 30Mbps performanc...
*** WARNING: This is a post aimed to newbies like me! ***‚Äč Hi there,I just managed to successfully install Merlin's firmware (june 2018) to my AC68U ...
I am using AC66U-B1 with stock firmware,I open guest network at 2.4Ghz but I dont't want to expose real MAC to guests.I want to change 2.4gHZ MAC addr...
Two routers provide different LAN address spaces. 1) Gateway address 192.168.0.1 with clients on the 192.168.0.0/24 subnet 2)Gateway address 10.0.0.1 ...
Hiwhat is a chance that quite new repeater as RP-AC87 will get a firmware upgrade enabling create a mesh system? (I already have router RT-AC88U)ThnxL...

Don't Miss These

  • 1
  • 2
  • 3