Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

NETGEAR logoNETGEAR has updated its entry-level two and four-bay NASes.

The two-bay ReadyNAS Duo v2 and 4-bay ReadyNAS NV+ v2 are the first NETGEAR NASes based on Marvell processors. Both use 1.6 GHz Marvell Kirkwood CPUs, have 256 MB of RAM and one Gigabit Ethernet LAN port.

The other key change is that NETGEAR has added two USB 3.0 ports and kept one USB 2.0 port on both products. The admin GUI has also been completely revamped.

The new NASes run NETGEAR's RAIDiator OS, which defaults to using the X-RAID2 automatic storage management system. But users can also opt to convert to standard RAID.

New ReadyNAS Duo and NV+ v2

While both products support most of RAIDiator's extensive feature set, support for NFS, FTP, HTTPS and iSCSI have been dropped.

The Duo v2 and NV+ v2 carry a three year limited warranty and start shipping November 13th at MSRPs of $199 for the diskless Duo v2 and $399 for the diskless NV+ v2.

More NAS

Wi-Fi System Tools
Check out the new Wi-Fi System Charts, Ranker and Finder!

Featured Sponsors



Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Loaded brand new Asus RT-AC66U_B1 with Merlin 380.70. It was empty, but I did reset it after flashing it. Then configured everything manually. I have ...
Hello all, I am trying to develop a remote firewall server that will run on my ac3200. Currently, I am running iptables commands by hand. I would like...
Hello everybody, this is my first post here, so please be gentle!I'm having issues with accessing my RT-AC88U web interface remotely via a PPTP tunnel...
I am not sure where to post this question.My daughter is buying a small business with 7 outside phone lines and a Panasonic phone switch advanced hybr...
I've got a Linksys EA8500 that does a great job at floor 1 and 2 of my house. I've got it located on floor 1, but where it sits, it has to go diagonal...

Don't Miss These

  • 1
  • 2
  • 3