Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

NAS News

Thecus logo Thecus announced a new five bay NAS with a built-in battery-backed UPS.

The N5810PRO runs on a 2.0 GHz Intel Celeron J1900 CPU with 4 GB of DDR3 RAM. It has five Gigabit Ethernet ports that can be aggregated to improve LAN bandwidth or trunked and one can be used for internet connection.

Other ports include one HDMI, two USB 2.0 and three USB 3.0. The built-in UPS has a Lithium Ion battery that can power the NAS long enough for a safe and clean shutdown when power is lost.

Thecus N5810PRO NAS

Thecus N5810PRO NAS

The N5810PRO supports EXT3/EXT4/XFS/Btrfs filesystems, which can be assigned per volume. BTRFS volumes support snapshots for easy and quick data recovery.

Other Thecus OS5 features include Data Guard for local and remote backups, VPN Server for secure remote access, Disk Clone and Wipe for data management and iSCI target and initiator for building out small storage networks.

The N5810PRO will start shipping at the end of April. Pricing has not been announced.

 

More NAS

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hey guys,I have the RT-AC68U router using 384.11_2 Merlin firmware. My main device (desktop connected via ethernet) seems to interfere with another de...
I have AX88U running 384.12 beta (but this problem also occurs on 384.11, therefore it is not the problem of beta firmware). I have tried to set up WP...
Hello everyone. I am new here, and I am trying to figure out how to do something. I would like to run 6 to 8 IP cameras and view them with my phone re...
Hi guys,I got the router several days ago and was trying to enable the 160mhz mode. However I can't find channel 50 and 114 (160mhz channel) in the li...
Hi everyone once more.I've noticed that on some points at my home, I get very weak WiFi signal.What should be a best buy? A WiFi Extender or an Access...

Don't Miss These

  • 1
  • 2
  • 3