Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Blog

Manufacturers continue to pump out more draft 802.11n products based on the current Draft 1.0 spec. They do this despite reviews (including mine) that point out numerous problems with all current implementations. Virtually every one of my reviews has ended with a recommendation to not buy the product.

So I've decided to take a pass on all reviews of draft 802.11n products until I can get my hands on gear based on Draft 2.0 chipsets (or whatever the new version will be called). According to Glenn Fleishman, this will be sometime in the spring of 2007.

I'm willing to change my position if you think I should. So let's hear from you. You don't even need to register to comment.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hello all,As the title states I'm looking to replace my Netgear R7000. I'm moving to a larger home so I'll need something that can provide coverage fo...
Hi! I just purchased the AC1200G+ to use as a WiFi client.My issue is that the web panel shows "Link rate" is capped at 173.3 Mbps which I'm disappoin...
When will clients start supporting ax wi fi and will ax routers be worth upgrading to? Looking at the Netgear RAX80/ RAX120 or the Asus RT-AX88U as an...
Hello everyone,Recently I've upgraded my trustworthy RT-N18U to RT-AC86U in order to achieve greater VPN speeds and 5 GHz. I've immediately flashed st...
First off newbie to the group. I bought an NG R7800 last week and set it up. FW is at 1.0.2.46 and was going to update it but read there are issues wi...

Don't Miss These

  • 1
  • 2
  • 3