Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Blog

Well, folks, I'm still looking for a few good writers. The last call produced turned up many interesting candidates. But when the realities of the job hit, many had to back away.

I'm looking for writers with expertise three areas:

  • Router reviews - You'll review consumer and small-business routers and gateways, both with and without integrated VPN gateways.
  • Open Source networking - You'll be reviewing open source networking distros and tools and writing how tos using open source tools.
  • Security - You'll write about small network security and network management issues.

Due to product shipment logistics, product reviewers must be located in the U.S. Otherwise, you can be anywhere as long as you have good English writing skills. Let's hear from you!

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

I am wanting to unbrick a tp link router and need to connect to it via a ethernet cable but I am wanting to do it with a windows surface pro 6 tablet....
Have a primary cable and a dsl backup.The AC86U is set to fall-over to the dsl if the cable goes down unfortunately this tends not to work worth a dam...
Hey everyone!Normally I'm good at figuring these kinds of issues out, but I am really struggling with this router... and now after finding this forum ...
I'm using a pi-hole to block ads on my home network, but as they say in the tutorial, you should unblock SNBForums...How? I've added snbforums.com to ...
Seems to be a mid-range AX model (probably this, assuming they haven't made any changes since the original announcement):https://fccid.io/MSQ-RTAXJ300...

Don't Miss These

  • 1
  • 2
  • 3