Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Installing the FXO and Asterisk

At this point, I turned off the monitor and moved to my Windows workstation to continue building my answering machine. The most popular SSH client for Windows that I'm aware of is PuTTY , and that's what I used to remotely access the Debian machine. After downloading the executable, simply double click it, enter your Asterisk PC IP address, and hit open. You should then be prompted with a Security Alert asking you to accept a key. Choose Yes and enter "root" (without the quotes) when the "login as:" prompt appears. Once logged in, you'll have full control as if you were sitting at the actual PC. You can start multiple SSH sessions into your Asterisk PC which will probably come in handy as you go.

Now we need to get and install the drivers (aka kernel modules) for the X100P card by issuing the following commands:

aptitude install module-assistant
aptitude install kernel-headers-`uname -r`
m-a prepare
apt-get build-dep zaptel-source
m-a a-i zaptel
depmod -a
modprobe zaptel
modprobe wcfxo

If everything worked properly up to this point, you should be able to type:

lsmod | grep zaptel

and see something similar to:

zaptel 182020 1 wcfxo

Which indicates that the X100P drivers are installed. The final step is to install Asterisk itself, which is done by entering:

aptitude install asterisk asterisk-config asterisk-sounds-main
Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

https://onedrive.live.com/?authkey=!AGY2taGX02nVmWA&id=CCE5625ED3599CE0!1427&cid=CCE5625ED3599CE0@RMerlin @thiggins is it possible to have "Alpha" pre...
From what I've seen, Asus' speedtest inclusion in 386 looks very good, making me unsure if I should continue with spdMerlin as a project.For anyone ru...
I installed my asus ax86u and everything is working fine (running Merlin 386.1_alpha3-g2f4644f6a8 ) Alle devices are connected to the internet (wired ...
I have just compiled the latest master (386)its a bit buggy on both of my RT-AC88U's still so am going to wait until its further alongevent log spam +...
Update 2020/11/12 (9.0.0.4.386.40947)https://drive.google.com/drive/folders/1UHZwR1buG-nei8fne9d9OktOS2gZy6Hs?usp=sharingThis version includes 19 mode...

Don't Miss These

  • 1
  • 2
  • 3