Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

The TV-M7 7" Wireless Internet Camera and Photo Monitor automatically detects and connects to up to four wired and wireless TRENDnet Internet Security Cameras to display camera video. The monitor also acts like a photo frame to display photo slideshows and play video and music.

The monitor has a 7" 800 x 480 pixel LCD display, 512 MB of built-in memory and a memory card reader supporting SD/MMC/MS (MS DUO) / MS Pro and xD memory cards. Supported formats include JPEG and BMP pictures (up to 16384 x 16384 pixels), MJPEG, MPEG1 and MPEG-4 video and MP3, WMA, AAC and OGG audio. Flickr and Picasa Web photo albums can also be displayed.

The monitor has an MSRP of $320.00. Availability was not announced.

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Been running this RT-AC86U for a little over a month now. 1st thing I did was to load Merlin firmware which seems to be running fine. A short while b...
I'm trying to build NoDogSplash on AsusWrt Merlin 384.14. Compile is fine, configuration also ok. But when I start nodogsplash, it complaining that ip...
I just replaced my Asus 1900P running Merlin with a Netgear r7800 running Voxel 1.0.2.72SF. So far it seems to be running well. Was curious if there a...
Hi Guys I'm totally new here, so forgive my ignorance. I've setup an RT-AC5300 at my in-laws home and put the Sky hub into Modem-Only mode (well, disa...
Hi. Noticed a few people in other posts mentioning that they use a higher end router as a node. I was thinking of doing this but not sure if it would ...

Don't Miss These

  • 1
  • 2
  • 3