Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Features

Tags:

Dell Axim X30 624MHz - more

I also checked to see whether the Intel PXA270 624MHz processor in the X30 would result in faster wireless throughput than produced by the Axim X3 Advanced model (using an Intel PXA263 clocked at 400 MHz) that I previously tested.

Wireless throughput - AP to STA, SanDisk WiFi card in Axim X3 and X30

Figure 4: Wireless throughput - AP to STA (downlink), SanDisk WiFi card in Axim X3 and X30
(click on image for a larger view)

Figures 4 and 5 show that the X30 has approximately twice the wireless speed of the X3 when using the SanDisk WiFi card in both uplink and downlink directions. The plots also show that once again, downlink speed is faster than uplink. Note that all the speed difference isn't necessarily due to the X30's faster processor, since there are other possible improvement sources including SDIO slot hardware and drivers.

Wireless throughput - STA to AP, SanDisk WiFi card in Axim X3 and X30

Figure 5: Wireless throughput - STA to AP (uplink), SanDisk WiFi card in Axim X3 and X30
(click on image for a larger view)

I also ran FTP-based tests so that I would have results to compare with PalmOS devices, which aren't supported by IxChariot. This time, instead of Pocket IE to do the FTP, I used Ruksun's Scotty FTP , figuring that a dedicated FTP client would provide better performance and also allow me to perform upload, as well as download, tests. Unfortunately, this means that the results may not be directly comparable to previous tests.

At any rate, the results of my FTP tests of the X30's w/ internal radio speed using Scotty FTP on the X30 and 3CDaemon Version 2.0 Revision 10 FTP server were 0.96Mbps for download and 0.34Mbps in the upload direction - a huge reduction from the IxChariot results. The result shows you the difference that application and protocol overhead can make in network throughput!

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hate to make another thread but was doing some tests after setting up static IP's etc before disabing WiFi, which does NOT work. 2.4GHz is gone, BUT I...
Is there an easy way to monitor outbound IP requests by device?I could do this in Wireshark, but it seems tedious and I'm sure if I knew the right com...
Just replaced my aging AC66u-b1 and got the AC86u loaded up latest merlin and factory reset.CPU load average is high? This is directly after a factory...
Hello, I am currently designing my first home network.My scope is pretty basic, I want to replace my ISP's router because it is a piece of trash and p...
Is it a good idea to reboot the router on a daily/weekly basis? The unit gets heavy use all day and evening with web and TV. Just wondering if there's...

Don't Miss These

  • 1
  • 2
  • 3