Like every other website on the planet, SmallNetBuilder uses cookies. Our cookies track login status, but we only allow admins to log in anyway, so those don't apply to you. Any other cookies you pick up during your visit come from advertisers, which we don't control.
If you continue to use the site, you agree to tolerate our use of cookies. Thank you!

Router Charts

Click for Router Charts

Router Ranker

Click for Router Ranker

NAS Charts

Click for NAS Charts

NAS Ranker

Click for NAS Ranker

More Tools

Click for More Tools

Wireless Features

Having been at the consumer network product review game for close to 15 years now, I confess that I long ago lost the ability to see these products as average buyers do. And I also admit that SmallNetBuilder can skew toward the esoteric at times with its constant focus on high performance.

So it's always refreshing to get a sanity check, which I recently did in response to my review of NETGEAR's R6100 AC1200 class router. The sanity checker is someone in the business (not from NETGEAR), who knows whereof he speaks.

The focus of his information was my moaning about the 10/100 ports on the router limiting its Router Rank, but more importantly its potential sales. Here are the bullet points he made in response:

• An increasing number of homes actually have nothing but the modem plugged into their router. A recent informal survey by my source of "connected" homes with adults between 20-35 years old showed nearly all of the homes were completely wireless (iPads, Notebooks, Roku boxes, etc.). No wired NAS, workstations, and in some cases, printers in the home, whatsoever.

• For at least the past year, the biggest selling router in the U.S. is N600 class with 10/100 ports. Next biggest is N300, followed by N150. N600 as a whole (10/100 + Gigabit) is larger than N300 by a respectable margin. N600 10/100 outsells N600 Gigabit by just about 2-to-1.

• Most U.S. buyers spend $60 - $70 for their router.

• Most LAN-side (non-internet) transfers in the home are wireless-to-wireless. The wireless-to-wired transfers that do happen are at rates below 100 Mbps. Even a lot of internet-based streaming video traffic occurs at rates around 5 Mbps peak.

That said, my informant says router makers are pushing strongly toward 11ac, but with a focus on providing higher throughput to mobile devices with 1x1 (AC580) or at most 2x2 (AC1200) radios. The key to satisfying this need, however, will be getting routers under the all-important $100 price point.Today however, AC1300 (2.4 GHz @ 450 Mbps; 5 GHz @ 867 Mbps) is the best seller, with AC1200 (2.4 GHz @ 300 Mbps; 5 GHz @ 867 Mbps) not far behind.

So, score one for NETGEAR. You're better off with a standalone Gigabit switch if you need one anyway, to keep its additional heat load out of the router.

More Wireless

Wi-Fi System Tools
Check out our Wi-Fi System Charts, Ranker and Finder!

Support Us!

If you like what we do and want to thank us, just buy something on Amazon. We'll get a small commission on anything you buy. Thanks!

Over In The Forums

Hi All,I'm looking to purchase an Access Point for my apartment. I've drawn up my current setup on the diagram below (red AP doesn't exist today). Ess...
Is there anybody that can explain the below, the router is currently using the latest firmware in amesh setup:Dec 29 14:27:44 kernel: pgd = ffffffc009...
Hey FolksA mate of mine just got the Asus Zenwifi XT8 kit to replace his (useless) Virgin Media box. We've put the Virgin into Modem mode and set up t...
This is FlexQoS, a fork of the original, groundbreaking FreshJR_QOS script written by @FreshJR.FlexQoS provides a fully customizable Adaptive QoS expe...
I plan to make available a beta version of the next kamoj add-on - if there is enough interest.N.B: Voxel firmware is a pre-requisite, not an option!I...

Don't Miss These

  • 1
  • 2
  • 3